Title: Laser Sintering of Thermoset Polyimide Composites

Authors: Kathy C. Chuang, Timothy J. Gornet, Kate Schneidau, and Hilmar Koerner

DOI: 10.33599/nasampe/c.19.0656

Abstract: Selective Laser Sintering (SLS) is an additive manufacturing technique that builds 3D models layer by layer using a laser to selectively melt cross sections in powdered polymeric materials, following sequential slices of the CAD model. SLS generally uses thermoplastic polymeric powders, such as polyamides (i.e. Nylon), and the resultant 3D objects are often weaker in their strength compared to traditionally processed materials, due to the lack of polymer inter-chain connection in the z-direction. Our previous effort showed the challenges of printing a melt-processable RTM370 imide resin powder terminated with reactive 4-phenylethynylphthalic anhydride by LS, due to its inherently low viscosity of these oligomers. This paper presented the first successful 3D printing of high temperature carbon fiber filled thermoset polyimide composites, followed by post cure cycles to promote additional crosslinking for achieving higher temperature (Tg = 370 °C) capability. The processes to build tensile specimens and a component by LS, and the characterization of RTM370 imide resin by DSC and rheology as well as evaluation of the LS printed polyimide composite specimens by SEM and mechanical tests will be discussed.

References: 1) David K. Leigh: “A Comparison of Polyamide 11 Mechanical Properties between Laser Sintering and Traditional Molding”, Proceedings of Solid Freeform Fabrication Symp. 574-605 (2012). 2) R. D. Goodridge, C. J. Tuck, R. J. M. Hague: “Laser Sintering of Polyamides and Other Polymers”, Progress in Materials Science, 57(2), 229-267 (2012). 3) S. Berretta, K. E. Evans, O. Ghita: Processability of PEEK, “A New Polymer for High Temperature Sintering”, European Polymer Journal, 68, 243-266 (2015). 4) S. Brretta, Y. Wang, R. Davies, O. R. Ghita: “Polymer Viscosity, Particle Coalescence and Mechanical Performance in High Temperature Laser Sintering”, Journal of Materials Science, 51(10), 4778-4794 (2016). 5) WO2017046132, Le-Huong, Nguyen: “Use of thermosetting Polymeric Powder Composition”. 6) WO2016127521, Chune Yan, Wei Zu, Yusheng Shi, Jie Liu: “3D Printing Manufacturing Method of Short fiber Reinforced Thermosetting Resin Composite Product”. 7) Kathy C. Chuang, Timothy Gornet, Hilmar Koerner: “Challenges in Laser Sintering of Melt-Processable Thermoset Imide Resins”, Proc. of CAMX Conference, September 26-29, Anaheim, CA (2016). 8) K. C. Chuang, D. M. Revilock, J. M. Pereira, J. M. Criss, Jr., E.A. Mintz: “High Temperature RTM370 Polyimide Composites Fabricated by RTM: Characterization and Impact Testing”, SAMPE Journal, 40(5), 48-57 (2013). 9) Kathy C. Chuang, Thomas A. Yip, Ronald B. Kollmansberger, Thomas K. Tsotsis: “Evaluation of RTM370 Polyimide Composites by Resin Film Infusion”, SAMPE Technical Conference, June 2-5, Seattle, WA (2014).

Conference: CAMX 2019

Publication Date: 2019/09/23

SKU: TP19-0656

Pages: 10

Price: $20.00