Search

DIGITAL LIBRARY: CAMX 2023 | ATLANTA, GA | OCTOBER 30-NOVEMBER 2

Get This Paper

Design optimization of a multi-material, fiber-reinforced composite-intensive body-in-white of a mid-size SUV

Description

Title: Design optimization of a multi-material, fiber-reinforced composite-intensive body-in-white of a mid-size SUV

Authors: Amit M. Deshpande, Rushabh Sadiwala, Nathan Brown, Pierre-Yves Lavertu, Sai Aditya Pradeep, Leon M. Headings, Ningxiner Zhao, Brad Losey, Ryan Hahnlen, Marcelo J. Dapino, Gang Li, Srikanth Pilla

DOI: 10.33599/nasampe/c.23.0169

Abstract: Transportation accounts for almost a third of all energy consumption and emissions in the U.S. With an emphasis on improving the energy efficiency of vehicles and transitioning to electrified vehicles, lightweighting has become relevant to compensate for the added complexity of battery packs and hybrid powertrains. Lightweight materials such as aluminum, magnesium, and fiber-reinforced plastic (FRP) composites can reduce the vehicle’s structural mass, the body-in-white (BIW), by up to 50%. However, the higher proportion of large sports utility vehicles (SUVs) and trucks in the North American fleet poses a challenge, as the larger size and high production scale of the structural components for this segment can significantly increase material costs. Thus, a multi-material approach to deploy FRP composites at select locations in an existing metal BIW can help advance composites design, integration, and manufacturing technologies. Furthermore, these designs can be translated for future EV structures. This study utilizes a systems approach to 1) establish design targets through structural analysis of the baseline SUV BIW design under various static and dynamic load cases, 2) conceptualize multi-material designs, and 3) assess the designs to meet lightweighting, cost, and sustainability objectives. Sustainable recycled carbon fiber-reinforced composites and other cost-effective FRP composite materials manufactured using state-of-the-art high-pressure resin transfer molding (HP RTM) technology were assessed for use in structural elements. An ultrasonic additive manufacturing (UAM) technique was implemented to produce mechanically interlocked metal-fiber transition joints to serve as a joining mechanism between fibers and metals in the multi-material design. To incorporate the transition joint design into the topology optimization scheme, a high-fidelity model of the fiber-metal transition joints that describes the fiber-oriented interactions between the fibers, cured-epoxy matrix, and metal components was developed. This model's results accurately represented the behavior from experimental testing. They can be transferred to the FEA solver as a computationally efficient material card specifically for use at the metal-composite transition regions in the proposed designs. The results from this system-level multi-material composites integration study have been presented.

References: [1] S. A. Pradeep, R. K. Iyer, H. Kazan, and S. Pilla, “Automotive Applications of Plastics: Past, Present, and Future,” Applied Plastics Engineering Handbook: Processing, Materials, and Applications: Second Edition, pp. 651–673, Jan. 2017, doi: 10.1016/B978-0-323-39040-8.00031-6. [2] C. Oberste, “Investigating the Relationship between Fiber Length, Volume Fraction, and Mechanical Properties of Fiber-Reinforced Plastics Lightweighting for the MassesTM,” 2019. [3] “Document Display | NEPIS | US EPA.” https://nepis.epa.gov/Exe/ZyPDF.cgi/P100Z3O4.PDF?Dockey=P100Z3O4.PDF (accessed Feb. 26, 2022). [4] “Plastics makers plot the future of the car.” https://cen.acs.org/articles/95/i45/Plastics-makers-plot-future-car.html (accessed Feb. 26, 2022). [5] “2017-2025_CAFE-GHG_Supplemental_NOI07292011”, Accessed: Feb. 27, 2022. [Online]. Available: https://www.nhtsa.gov/staticfiles/rulemaking/pdf/cafe/2017-2025_CAFE-GHG_Supplemental_NOI07292011.pdf [6] A. M. Deshpande et al., “Design and Development of a Multi-material, Cost-competitive, Lightweight Mid-size Sports Utility Vehicle’s Body-in-White,” in CAMX 2022 | Anaheim, CA, 2022. doi: 10.33599/nasampe/c.22.0148. [7] P. Malnati, “Composites as auto-body reinforcements,” Compositesworld, 2021. https://www.compositesworld.com/articles/composites-as-auto-body-reinforcements (accessed May 13, 2022). [8] J. Starke, “CARBON COMPOSITES IN AUTOMOTIVE STRUCTURAL APPLICATIONS”. [9] “First Body-in-White Made from Composites for a Chinese Electric Car”, Accessed: Jun. 05, 2022. [Online]. Available: www.springerprofessional.com/automotive [10] J. Takahashi, “Strategies and Technological Challenges for Realizing Lightweight Mass Production Automobile by using Thermoplastic CFRP,” 2011. Accessed: Jun. 27, 2022. [Online]. Available: http://j-t.o.oo7.jp/publications/20110820ppt.pdf [11] M. R. Bambach, “Fibre composite strengthening of thin steel passenger vehicle roof structures,” 2013, doi: 10.1016/j.tws.2013.09.018. [12] “automotive structural adhesives.” https://www.sae.org/news/2019/08/automotive-structural-adhesives-overview (accessed Jun. 19, 2023). [13] “Adhesives in Automotive Assembly | Adhesives & Sealants Industry.” https://www.adhesivesmag.com/articles/98072-adhesives-in-automotive-assembly (accessed Jun. 19, 2023). [14] H. Guo, M. B. Gingerich, L. M. Headings, R. Hahnlen, and M. J. Dapino, “Joining of carbon fiber and aluminum using ultrasonic additive manufacturing (UAM),” Compos Struct, vol. 208, pp. 180–188, Jan. 2019, doi: 10.1016/J.COMPSTRUCT.2018.10.004. [15] C. Fais, “Lightweight automotive design with HP-RTM,” Reinforced Plastics, vol. 55, no. 5, pp. 29–31, Sep. 2011, doi: 10.1016/S0034-3617(11)70142-4. [16] “Dynamic Fluid Compression Molding A new process for composite mass-production,” 2016. [17] A. Mittal et al., “Designing a Production-Ready Ultra-Lightweight Carbon Fiber Reinforced Thermoplastic Composites Door,” in SAE Technical Papers, SAE International, Apr. 2021. doi: 10.4271/2021-01-0365. [18] V. aditya Yerra, S. Aditya Pradeep, and S. Pilla, “A SYSTEMS APPROACH TO DEVELOP ULTRA LIGHTWEIGHT COMPOSITE DOOR USING FIBER REINFORCED THERMOPLASTICS,” 2018, Accessed: Aug. 02, 2022. [Online]. Available: https://www.researchgate.net/publication/332438363 [19] M. S. Sarfraz, H. Hong, and S. S. Kim, “Recent developments in the manufacturing technologies of composite components and their cost-effectiveness in the automotive industry: A review study,” Compos Struct, vol. 266, Jun. 2021, doi: 10.1016/J.COMPSTRUCT.2021.113864. [20] H. Guo, M. B. Gingerich, L. M. Headings, R. Hahnlen, and M. J. Dapino, “Experimental investigation of CFRP-AA structures joined by ultrasonic additive manufacturing (UAM) and resistance spot welding (RSW),” Compos B Eng, vol. 260, p. 110768, Jul. 2023, doi: 10.1016/J.COMPOSITESB.2023.110768.

Conference: CAMX 2023

Publication Date: 2023/10/30

SKU: TP23-0000000169

Pages: 19

Price: $38.00

Get This Paper