Title: Optical Effects during In-Situ Fabrication of Thermoplastic Sandwich Structures Using Laser-Based Thermoplastic Automated Fiber Placement

Authors: Berend Denkena, Carsten Schmidt, Christopher Schmitt, Maximilian Kaczemirzk

DOI: 10.33599/nasampe/c.24.0222

Abstract: This work presents a novel concept for the in-situ production of thermoplastic sandwich structures using laser-based thermoplastic automated fiber placement (TAFP). Thermoplastic carbon fiber reinforced tapes are deposited on a thermoplastic foam core for the additive application of sandwich cover layers. In order to form a cohesive bond between the applied cover layer and the foam core, the two joining partners must be in a molten state. The heating process and the resulting temperature distributions are significantly influenced by the laser power absorbed within the TAFP heating zone. In order to gain a basic understanding of the optical interactions, optical investigations are carried out on carbon fiber-reinforced low-melt polyaryletherketone (CF/LM-PAEK) tapes by TORAY and a thermoplastic polyetherimide (PEI) closed-cell foam R82.110 by AIREX with regard to reflection, absorption and transmission. The results are then implemented in an optical ray tracing model to predict absorbed power when depositing tapes onto a foam core. Modeled power distributions show that the tapes absorb way more radiation compared to the foam core. However, radiation reflected from the foam shows a very positive influence on the laser radiation absorbed by the fed tapes near the nip point.

References: 1. Martin, R. G., Johansson, C., Tavares, J. R., Dube, M. “Manufacturing of thermoplastic composite sandwich panels using induction welding under vacuum.” Composites Part A (2024). https://doi.org/10.1016/j.compositesa.2024.108211 2. Vieille, B., Casado, V., Bouvet, C. “Comparative study on the impact behavior and damage tolerance of woven carbon fiber reinforced thermoplastic- and thermosetting- composites.” European Conference on Composite Materials, Venice, 2012. 3. Skawinski, O., Binetruy, C., Krawczak, P., Grando, J., Bonneau, E. “All- Thermoplastic Composite Sandwich Panels—Part I: Manufacturing and Improvement of Surface Quality.” Journal of Sandwich Structures & Materials (2004). https://doi.org/10.1177/1099636204040094 4. Grünewald, J. Thermoplastic Composite Sandwiches for Structural Helicopter Application. Bayreuth: University of Bayreuth, 2018. 5. Grünewald, J., Parlevliet, P., Alstädt, V. “Manufacturing of thermoplastic composite sandwich structures: A review of literature.” Journal of thermoplastic composite materials (2017). https://doi.org/10.1177/0892705715604681 6. Stokes-Griffin, C. M., Matuszyk, T. I., Compston, P., Cardew-Hall, M. J. “Modelling the Automated Tape Placement of Thermoplastic Composites with In-Situ Consolidation.” Sustainable Automotive Technologies, Melbourne, 2012. 7. Schledjewski, R. “Thermoplastic tape placement process – in situ consolidation is reachable.” Plastics, Rubber and Composites (2009). https://doi.org/10.1179/146580109X12540995045804 8. Fischer, F., Endrass, M., Deden, D., et. al. “How to Produce a Thermoplastic Fuselage.” 6th International Conference on Thermoplastic Composites, Bremen, 2022. 9. Trende, A., Aström, B. T., Wöginger, A., Mayer, C., Neitzel, M. “Modelling of heat transfer in thermoplastic composites manufacturing: Double-belt press lamination.” Composites Part A (1999). https://doi.org/10.1016/S1359-835X(99)00016-0 10. Kulandaivel, P. Manufacturing and performance of thermoplastic composite sandwich structures. Nottingham: University of Nottingham, 2006. 11. Rozant, O., Bourban, P. -E-, Manson, J. -A. “Manufacturing of three dimensional sandwich parts by direct thermoforming.” Composites Part A (2001). https://doi.org/10.1016/S1359-835X(00)00184-6 12. Aström, B. T., Akermo, M., Carlsson, A. “The all-thermoplastic sandwich concept.” Fourth International Conference on Sandwich Construction, Stockholm, 1998. 13. Schreier, P., Neumeyer, T., Knöchel, J., Mühlbacher, M., Alstädt, V. “Thermoplastic Sandwich Structures with Bead Foam Core—Novel Processing Approaches.” International Conference on Sandwich Structures, Lausanne, 2018. 14. Deniz, O., Horst, P., Schmidt, C., “Production-based Multi-criteria Design Optimisation of an Unconventional Composite Fuselage Side Panel by Evolutionary Strategies and a Surrogate Model of Manufacturability Analysis.” 11th World Congress on Structural and Multidisciplinary Optimisation, Sidney, 2015. 15. Denkena, B., Horst, P., Heimbs, S., Schmidt, C., Reichert, L., Tiemann, T. “Automated fiber placement: The impact of manufacturing constraints on achieving structural property targets for CFRP-stiffeners.” 16th Conference of Intelligent Computation in Manufacturing Engineering, Italy, 2022. 16. Denkena, B., Schmidt, C., Schmitt, C., Kaczemirzk, M. “Experimental Investigation on the Use of a PEI Foam as Core Material for the In-Situ Production of Thermoplastic Sandwich Structures Using Laser-Baser Thermoplastic Automated Fiber Placement.” Materials (2022). https://doi.org/10.3390/ma15207141 17. Beyerler, E. P., Güceri, S. I., “Thermal analysis of Laser-Assisted Thermoplastic-Matrix composite tape consolidation.” J. Heat Transfer (1988) [http://dx.doi.org/10.1115/1.3250502] 18. Neijhad, M. N. G., Cope, R. D., Güceri, S. I. “Thermal analysis of in-situ thermoplastic composite tape laying.” Journal of Thermoplastic Composite Materials (1991). https://doi.org/10.1177/089270579100400102 19. Grouve, W. Weld Strength of Laser-Assisted Tape-Placed Thermoplastic Composites. Twente: University of Twente, 2012. 20. Baho, O., Ausias, G., Grohens, Y., Barile, M., Legge, L., Ferec, J. “Automated fibre placement process for a new hybrid material: A numerical tool for predicting an efficient heating law.” Composites: Part A (2021). https://doi.org/10.1016/j.compositesa.2021.106360 21. Stokes-Griffin, C. M., Compston, P. “A combined optical-thermal model for near-infrared laser heating of thermoplastic composites in an automated tape placement process.” Composites: Part A (2014). http://dx.doi.org/10.1016/j.compositesa.2014.08.006 22. Stokes-Griffin, C. M., Compston, P. “Optical characterization and modelling for oblique near-infrared laser heating of carbon fibre reinforced thermoplastic composites.” Opt. Lasers Eng. (2015). http://dx.doi.org/10.1016/j.optlaseng.2015.03.016 23. Weiler, T., Emonts, M., Striet, P., Gronenborn, S., Janssen, H. “Optical modelling of VCSEL-assisted thermoplastic tape placement.” ECCM17, Munich, 2016. 24. Reichardt, J., Baran, I., Akkerman, R., “New analytical and numerical optical model for the laser assisted tape winding process.” Composites Part A (2018) 25. Germer, T. A., Stover, J. C., Schröder, S. “Chapter 8 – Angle-Resolved Diffuse Reflectance and Transmittance.” Experimental Methods in the Physical Sciences (2014). https://doi.org/10.1016/B978-0-12-386022-4.00008-X

Conference: CAMX 2024 | San Diego CA

Publication Date: 2024/9/9

SKU: TP24-0000000222

Pages: 15

Price: $30.00