DIGITAL LIBRARY: CAMX 2024 | SAN DIEGO, CA | SEPTEMBER 9-12

Get This Paper

Chemically Treated Helical Carbon Nanotubes Reinforcement for Polymeric Nanocomposites: Influence of Sonication Time and Treatment Sequence with a Mixture of Nitric-Sulfuric-Hydrochloric Acids at High Molarities

Description

Title: Chemically Treated Helical Carbon Nanotubes Reinforcement for Polymeric Nanocomposites: Influence of Sonication Time and Treatment Sequence with a Mixture of Nitric-Sulfuric-Hydrochloric Acids at High Molarities

Authors: Ramanan Sritharan, Sean Reza Taklimi, Ali Ghazinezami, Davood Askari

DOI: 10.33599/nasampe/c.24.0302

Abstract: Composite materials have become one of the widely used material systems for applications such as aircraft structural components, wind turbine blades, interior, and exterior automotive components, boats, and surfboards. Composite materials being non-homogenous, their structures can delaminate and disintegrate, mostly due to poor interlaminar strength since there is no reinforcement between the laminae to bear the load. One of the unique solutions to improve the interlaminar strength is the use of nano-scale reinforcement between the laminae, within the resin, and between the fiber filaments. Carbon nanotubes (CNTs) are one such nanomaterial with superior mechanical, electrical, optical, magnetic, and thermal properties. CNTs have been extensively studied in recent decades because of their exceptional properties. However, they react poorly with polymeric resin molecules, because of their inertness. One way to improve their interaction with polymer molecules is through covalent chemical functionalization. The functionalization treatment creates defects and attaches functional groups on the surface of the individual CNTs thereby modifying its interfacial interaction with the polymers. Our previous research has shown that helical CNTs (HCNTs) perform better than straight CNTs, because of their geometrical configurations. In this research, HCNTs that were chemically functionalized using mixtures of nitric, sulfuric, and hydrochloric acids through 8 different procedures by varying sonication time, molarities of the nitric, sulfuric, and hydrochloric acids (i.e., 3, 6, and 16) in different sequences. Nanocomposite panels were made using epoxy reinforced with three different weight percentages of these functionalized HCNTs (FHCNTs) and then tested and characterized per ASTM 638-03 and ASTM 5045 standards for tensile and fracture toughness properties, respectively. The test results for nanocomposite samples were all compared against the samples with pristine HCNTs reinforcements and the neat epoxy. Results showed considerable improvements in mechanical properties of the samples containing FHCNTs and the best functionalization processes were identified.

References: [1] M. Monthioux and V. L. Kuznetsov, “Who should be given the credit for the discovery of carbon nanotubes?,” Carbon, vol. 44, no. 9, pp. 1621–1623, Aug. 2006, doi: 10.1016/j.carbon.2006.03.019. [2] S. Iijima, “Helical microtubules of graphitic carbon,” Nature, vol. 354, no. 6348, pp. 56–58, Nov. 1991, doi: 10.1038/354056a0. [3] S. Iijima, “Carbon nanotubes: past, present, and future,” Physica B: Condensed Matter, vol. 323, no. 1, pp. 1–5, Oct. 2002, doi: 10.1016/S0921-4526(02)00869-4. [4] A. A. Green and M. C. Hersam, “Properties and Application of Double-Walled Carbon Nanotubes Sorted by Outer-Wall Electronic Type,” ACS Nano, vol. 5, no. 2, pp. 1459–1467, Feb. 2011, doi: 10.1021/nn103263b. [5] A. Eatemadi et al., “Carbon nanotubes: properties, synthesis, purification, and medical applications,” Nanoscale Research Letters, vol. 9, no. 1, p. 393, Aug. 2014, doi: 10.1186/1556-276X-9-393. [6] T. Hayashida, L. Pan, and Y. Nakayama, “Mechanical and electrical properties of carbon tubule nanocoils,” Physica B: Condensed Matter, vol. 323, no. 1–4, pp. 352–353, Oct. 2002, doi: 10.1016/S0921-4526(02)01002-5. [7] M. Nejhad, V. Veedu, A. Cao, P. Ajayan, and D. Askari, “Three-Dimensionally Reinforced Multifunctional Nanocomposites,” WO/2008/054409, May 08, 2008. Available: https://patentscope.wipo.int/search/en/detail.jsf?docId=WO2008054409 [8] D. Askari and M. N. Ghasemi-Nejhad, “Generally cylindrical orthotropic constitutive modeling of matrix-filled carbon nanotubes: Transverse mechanical properties and responses,” Jnl of Sandwich Structures & Materials, vol. 22, no. 7, pp. 2330–2363, Oct. 2020, doi: 10.1177/1099636218795377. [9] A. L. Kalamkarov, D. Askari, V. P. Veedu, and M. N. Ghasemi-Nejhad, “Generally Cylindrical Orthotropic Constitutive Properties Modeling of Matrix-filled Single-walled Nanotubes: Axial Mechanical Properties,” Journal of Composite Materials, vol. 41, no. 6, pp. 757–779, Mar. 2007, doi: 10.1177/0021998306067018. [10] R. Sritharan and D. Askari, “Analytical Modeling Of A 3-Phase Nanocomposite Cylindrical Unit Cell With Orthotropic Constituents,” in CAMX 2023, NA SAMPE, 2023. doi: 10.33599/nasampe/c.23.0177. [11] R. Sritharan and D. Askari, “Interlaminar Properties Improvement of Nanocomposites Using Coiled Nanomaterials,” SAE International, Warrendale, PA, SAE Technical Paper 2021-01–0027, Mar. 2021. doi: 10.4271/2021-01-0027. [12] R. Vijayan, A. Ghazinezami, S. R. Taklimi, M. Y. Khan, and D. Askari, “The geometrical advantages of helical carbon nanotubes for high-performance multifunctional polymeric nanocomposites,” Composites Part B: Engineering, vol. 156, pp. 28–42, Jan. 2019, doi: 10.1016/j.compositesb.2018.08.035. [13] R. Sritharan and D. Askari, “Enhancing the short-beam strength of composite laminates using helical carbon nanotubes,” Composites Part B: Engineering, vol. 221, p. 108999, Sep. 2021, doi: 10.1016/j.compositesb.2021.108999. [14] R. Sritharan and D. Askari, “Improvement of the tensile properties of laminated composites reinforced with Heli-Coil forms of carbon nanotubes,” Polymer Composites, vol. 44, no. 10, pp. 7070–7083, 2023, doi: 10.1002/pc.27619. [15] R. Sritharan and D. Askari, “Effects of Helical Carbon Nanotubes on Mechanical Performance of Laminated Composites and Bonded Joints,” SAE Int. J. Adv. & Curr. Prac. in Mobility, vol. 2, no. 3, Art. no. 2020-01–0029, Mar. 2020, doi: 10.4271/2020-01-0029. [16] R. Sritharan and D. Askari, “Enhancement of the Mechanical Properties And Bonding of Composite Laminates and Assemblies Using Carbon Nano-Coils,” in CAMX 2022, NA SAMPE, 2022. doi: 10.33599/nasampe/c.22.0137. [17] Davood Askari, “Helical Carbon Nanotubes,” US20190382269A1 [18] D. Askari, “Nanocomposites with interlocking nanostructures,” US20190308905A1, Oct. 10, 2019. Available: https://patents.google.com/patent/US20190308905A1/en [19] M. N. G. Nejhad, V. P. Veedu, A. Yuen, and D. Askari, “Polymer matrix composites with nano-scale reinforcements,” US7658870B2, Feb. 09, 2010. Available: https://patents.google.com/patent/US7658870B2/en [20] S. R. Taklimi, “Effects of different processing parameters on covalent functionalization of straight and helical carbon nanotubes for nanocomposite applications,” May 2017. Available: https://soar.wichita.edu/handle/10057/14509 [21] “EPON Resin 815C | Epon 815C Epoxy Resin Blend | Hexion,” Miller-Stephenson Chemicals. Available: https://www.miller-stephenson.com/product/epon-815c/ [22] “EPIKURE 3282 | Epikure 3282 Curing Agent | Modified Aliphatic Amine,” Miller-Stephenson Chemicals. Available: https://www.miller-stephenson.com/product/epikure-3282/ [23] “Helical Multi Walled Carbon Nanotubes,” Cheap Tubes. Available: https://www.cheaptubes.com/product-category/helical-multi-walled-carbon-nanotubes/ [24] R. Sritharan and D. Askari, “A design of experiment study to investigate the effects of hardener concentration, stirring time, and air bubbles on the tensile strength of epoxy resin,” Journal of Elastomers & Plastics, vol. 54, no. 7, pp. 1129–1147, Nov. 2022, doi: 10.1177/00952443221131197. [25] “Standard Test Method for Tensile Properties of Plastics.”. Available: https://www.astm.org/d0638-22.html [26] “Standard Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials.”. Available: https://www.astm.org/d5045-14r22.html

Conference: CAMX 2024 | San Diego CA

Publication Date: 2024/9/9

SKU: TP24-0000000302

Pages: 12

Price: $24.00

Get This Paper