DIGITAL LIBRARY: CAMX 2024 | SAN DIEGO, CA | SEPTEMBER 9-12

Get This Paper

Multiplexing Extrusion System Development for Increased throughput, Flow Accuracy and Improved Microstructure

Description

Title: Multiplexing Extrusion System Development for Increased throughput, Flow Accuracy and Improved Microstructure

Authors: Halil Tekinalp, Alex Roschli, Jesse Heineman, Vipin Kumar, Soydan Ozcan, Brian Post, Paritosh Mhatre, Umesh Marathe, Ercan Cakmak.

DOI: 10.33599/nasampe/c.24.0362

Abstract: As additive manufacturing technologies advance and 3D-printers get larger, there is a constant need for larger extruders with higher throughput to quickly construct objects. Extruders can continually be made larger, but the weight of an extruder grows faster than its output, and larger/heavier extruders require a stiffer and more expensive gantries or robots to carry and control them. These extruders also struggle with unreliable flow below approximately 10% of their maximum flowrate, causing control issues for small builds and low speed printing operations. The solution we propose to this problem is to use multiple smaller extruders together to achieve the same high throughput of a single large extruder by combining, or multiplexing, the output into a single stream of molten polymer. While multiplexing helps improve the throughput without causing huge weight penalties, the use of smaller and less expensive extruders allows for easier flow rate control on small prints. If the desired print is too small, one extruder can be turned off so that only one extruder is being used for output. This can be extended to more than two extrusion systems, as well. Furthermore, multiplexing can enable the use of multiple materials at once, by using each extruder for a different material. While this leads to extrusion of two or more different materials next to each other side by side, with the modification of the nozzle design and/or multiplexing system we are expecting to enable much more complicated bead designs such as “ribbon” and “core & sheath” and microstructure control. In our initial work, we were successfully able to double the throughput using two identical extruders running at a range of extrusion speeds. We have also showed dual material extrusion in the same bead and we are working on further development of the technology, which we believe will disrupt the AM technology opening new opportunities and applications areas.

References: 1. Post, B. K., et al. ""The economics of big area additive manufacturing."" (2016). 2. “Tradesman SeriesTM P3-44.” JuggerBot 3D, 6 Apr. 2023, juggerbot3d.com/products/tradesman-series-p3-44/. 3. Marrett, Duane. Thermwood LSAM - Large Scale Additive Manufacturing, www.thermwood.com/lsam_home.htm. Accessed 4 May 2024. 4. “Heron AM.” Caracol, 8 Apr. 2024, www.caracol-am.com/technologies/heron-am. 5. Dormeier, S. ""Extruder control."" IFAC Proceedings Volumes 13.12 (1980): 551-560. 6. Chesser, Phillip, et al. ""Extrusion control for high quality printing on Big Area Additive Manufacturing (BAAM) systems."" Additive Manufacturing 28 (2019): 445-455. 7. Roschli, Alex Christopher. ""Dynamic Extruder Control for Polymer Printing in Big Area Additive Manufacturing."" (2016). 8. Compton, Brett G., et al. ""Thermal analysis of additive manufacturing of large-scale thermoplastic polymer composites."" Additive Manufacturing 17 (2017): 77-86. 9. Wolszczak, Piotr, et al. ""Heat distribution in material during fused deposition modelling."" Rapid Prototyping Journal 24.3 (2018): 615-622. 10. “Learn More about Our Robot Based Solutions for Large Scale 3D Printing.” CEAD, 1 Nov. 2023, ceadgroup.com/solutions/robot-based-solutions/.

Conference: CAMX 2024 | San Diego CA

Publication Date: 2024/9/9

SKU: TP24-0000000362

Pages: 15

Price: $30.00

Get This Paper