Title: A Practical Accelerated Ultraviolet Exposure Test for Polymers Informed by Data and Easily Implemented

Authors: Curtis M. Bartosz, Felix C. Chen

DOI: 10.33599/nasampe/c.25.115

Abstract: In an earlier publication Bartosz and Chen [1] developed an accelerated test for UV exposure of plastic materials. This test simulates the damage from multiyear outdoor weathering by exposing test articles under higher intensity UV light but at much shorter times, on the order of weeks only. The equivalence between laboratory exposure time and actual field duration was tallied by accounting for the quantity of photons striking the test surface. The intensity and nature of the UV damage was additionally characterized by fracture studies and compared with field data from one of our products deployed for known exposure times at specific global locations. The similarity in results from both test samples and the fielded samples provided an initial confirmation of this accelerated test. For engineering units that have now sustained long term UV degradation during the four years from when this method was introduced, quantifying their UV damage by measuring the color change over time in CIELAB color space and correlating with our accelerated test has since reinforced its correctness to the point that we have used this method for both analyzing field degradation and screening components in our supply chain. This paper reports on these new developments along with how they further corroborate the effectiveness of this accelerated UV test.

References: 1. C. Bartosz and F. Chen, “Acceleration Factor for Polymer Degradation by UV Light Exposure,” 2021 IEEE 23rd Electronics Packaging Technology Conference (EPTC), Singapore, Singapore, 2021, pp. 170–175. doi: 10.1109/EPTC53413.2021.9663950 2. Al-Jumaily, Kais J., Natiq A. Zaki, and Ali M. Al-Salihi. “Impact of Cloud Cover on Global UV Irradiance over Baghdad, Iraq.” IOSR Journal of Applied Physics 6.1 (2014): 63–69. doi: 10.9790/4861-06116369 3. “Calculating Zenith and Azimuth Angles for GridSat-B1.” United States National Oceanic and Atmospheric Administration. National Centers for Environmental Information. Asheville, NC: NOAA, n.d. 4. “Air Mass.” United States Department of Energy. Sandia National Laboratories. Albuquerque, NM: Sandia, n.d. https://pvpmc.sandia.gov/modeling-guide/1-weather-design-inputs/irradiance-insolation/air-mass/ 5. "Cloud Cover and Solar Radiation." United States. National Aeronautics and Space Administration. Space Math @ NASA. Washington, DC: NASA, n.d. 6. F. N. Jones, M. E. Nichols and S. P. Pappas, Organic Coatings: Science and Technology. 4th ed. Hoboken, NJ: John Wiley & Sons, Inc., 2017 7. J. W. Evans, “An Overview of Thermally Induced Low Cycle Fatigue in Surface Mounted Solder Joints,” Surf. Mount Technol. (Feb.1989) 35–39 8. H. D. Solomon, “Strain-Life Behavior in 60/40 Solder,” J. Electron. Packag. 111 (1989) 7582; doi: https://doi.org/10.1115/1.3226525 9. Ӧ. Hallberg and D. S. Peck, “Recent Humidity Accelerations, A Base for Testing Standards,” Qual. Reliab. Eng. Int. 7 (1991) 169–180; doi: https://doi.org/10.1002/qre.4680070308 10. V. Lakshminarayanan, “What Causes Semiconductor Devices to Fail?” Test And Measurement, (Sept. 2000) 21–25 11. W. Nelson, Accelerated Testing: Statistical Models, Test Plans, and Data Analysis. 2nd ed. Hoboken, NJ: John Wiley & Sons, Inc., 2004 12. C. E. Ebeling, An Introduction to Reliability and Maintainability Engineering. 3rd Ed. Long Grove, IL: Waveland Press, Inc., 2019 13. P. P. O’Connor and A. Kleyner, Practical Reliability Engineering. 5th ed. Chichester, UK: John Wiley & Sons, Inc., 2012. doi: 10.1002/9781119961260 Boca 14. J. A. Nachlas, Reliability Engineering: Probabilistic Models and Maintenance Methods. 2nd ed. Raton, FL: Taylor & Francis Group, 2017. doi: https://doi.org/10.1201/9781315307596 15. J. E. Breneman, C. Sahay and E. E. Lewis, Introduction to Reliability Engineering. 3rd ed. Hoboken, NJ: John Wiley & Sons, Inc., 2022 16. E. A. Elsayed, Reliability Engineering. 3rd ed. Hoboken, NJ: John Wiley & Sons, Inc., 2021 17. M. Ohring with L. Kasprzak, Reliability and Failure of Electronic Materials and Devices. 2nd ed. New York: Elsevier, 2015 18. J. Bernstein, Reliability Prediction from Burn-In Data Fit to Reliability Models. New York: Elsevier, 2014

Conference: CAMX 2025

Publication Date: 2025/09/08

SKU: 115

Pages: 15

Price: $30.00