Title: Proof of Concept for Vacuum Bag only Consolidation of Braided Thermoplastic Fabric

Authors: Alfonso D Lopez, Brennan Carroll, Ravi Patel, Alex Silva, Jonathan Huang, Jean-Philippe Canart, Upul Palliyaguru, Waruna Seneviratne

DOI: 10.33599/nasampe/c.25.172

Abstract: This paper presents a pioneering approach to consolidate thermoplastic braided fabrics using a Vacuum Bag Only (VBO) process, demonstrating its potential to replace or augment thermoplastic tape placement via Automated Fiber Placement (AFP). Leveraging advanced thermoplastic carbon fiber prepreg from Teijin Carbon with braid converting from A&P Technology, VBO consolidation addresses higher rate Out of Autoclave (OoA) processing for applications requiring high mechanical properties and a high impact resistance while simplifying manufacturing workflows. The VBO consolidation process capitalizes on key material properties of thermoplastic materials and braided fabrics: drapability, the absence of tack and cold flow, no exothermic reactions or volatiles, and guaranteed air evacuation pathways regardless of part geometry. Two challenging parts have been produced to demonstrate VBO consolidation capability, a conical spinner fairing and a large area curved skin. Both were successfully fabricated using braided fabric made from IMS65 P12 carbon fiber with 34% PAEK content. The parts showed excellent consolidation quality under VBO conditions, with a 30 to50 minute hold at temperatures about 390°C. Parts were validated through visual and Cscan NDI characterization. In addition, compression molded panels made from the same braid fabric exhibited mechanical properties equivalent to qualified carbon fiber with PAEK tape materials from Toray and Victrex, NMS 125 and NMS 122. The novel use of VBO for thermoplastic fabrics, particularly for large parts, represents a significant step change in thermoplastic composite manufacturing and, to the best of our knowledge, marks the first published instance of VBO consolidation with thermoplastic fabrics.

References: [1] Swamy, Jagadeesh N., et al. "An experimental study on filling of gaps and void pockets during vacuum-bag-only consolidation of fiber placed preforms." Journal of Thermoplastic Composite Materials 38.3 (2025): 1089-1106. [2] Hines, T. Automated Fiber Placement of Uni-directional Tape at Varied Nip Temperatures, followed by Vacuum-bag-only Consolidation [conference presentation]. American Composite Manufacturing Association Thermoplastic Composite Conference, San Diego CA 2024. [3] Cuenot, C., et al. "EXPERIMENTAL STUDY OF THERMOPLASTIC CARBON COMPOSITE CONSOLIDATION BY VACUUM BAG ONLY (VBO)." Proceedings of the 21st European Conference on Composite Materials. Vol. 5. [4] Zhang, D., Heider, D., & Gillespie Jr, J. W. (2015). Role of Prepreg Interlayer Permeability on Void Reduction During Oven Vacuum Bag Processing of Thick Section Thermoplastic Composites. Baltimore, MD. [5] Hudson, T.. Experimental Evaluation of the Insitu Consolidation Automated Placement of Polyaryletherketone Composites [conference presentation]. American Composite Manufacturing Association Thermoplastic Composite Conference, San Diego CA 2024. [6] National Aeronautic and Space Administration. Hi-Rate Composite Aircraft Manufacturing Project. NASA.gov. https://www.nasa.gov/directorates/armd/aavp/hicam/ . Accessed Jun 1, 2025. [7] Dr. Rick Young. Hi-Rate Composite Aircraft Manufacturing (HiCAM) Project Overview. NASA.gov. https://www.nasa.gov/wp-content/uploads/2022/07/hicam-overview-apr-2022.pdf . Accessed June 1, 2025. [8] European Union Clean Aviation program. Multi Functional Fuselage Demonstrator. cleanaviation.eu. https://clean-aviation.eu/clean-sky-2/key-demonstrators/multi-functional-fuselagedemonstrator. Accessed June 1, 2025. [9] Wichita State University. Medium Toughness PAEK thermoplastics Toray (Formerly TenCate) Cetex TC1225 (LM PAEK) T700GC 12K T1E Unidirectional Tape 145 gsm 34% RC Qualification Material Property Data. https://www.wichita.edu/industry_and_defense/NIAR/Documents/TorayTC1225UnitapeCAMRP-2019-036RevA5.10.2021MPDRFinal.pdf .Accessed June 1, 2025. [10] Wichita State University. Victrex AE 250 LM PAEK with Hexcel AS4 12K Unitape 34% RC Qualification Material Property Data Report. https://www.wichita.edu/industry_and_defense/NIAR/Documents/CAM-RP-2021-025-NCVictrex-AE250-AS4-12k-Uni-MPDR-Rev-NC-11.18.22.pdf .Accessed June 1, 2025. [11 ] Arquier, Raphaël, et al. "Consolidation of continuous-carbon-fiber-reinforced PAEK composites: a review." Materials Today Communications 32 (2022): 104036. 23 [12] Swamy, Jagadeesh N., et al. "Vacuum-bag-only consolidation of C/PEKK fiber placed preforms with engineered gas evacuation channels." Journal of Thermoplastic Composite Materials 37.4 (2024): 1309-1326. [13]. Lopez, Alfonso D., et al. " Comparing crack tolerance of different thermoplastic composite architecture in a first article trailing edge rib demonstrator: UD, Fabric, and Braid, Part I” Seattle WA – April 17-20 / 2023. [14] Falzon, Paul J., and Israel Herszberg. "Mechanical performance of 2-D braided carbon/epoxy composites." Composites science and technology 58.2 (1998): 253-265. [15] Swanson, Stephen R., and Lloyd V. Smith. "Comparison of the biaxial strength properties of braided and laminated carbon fiber composites." Composites Part B: Engineering 27.1 (1996): 71-77. [16] Galos, Joel. "Thin-ply composite laminates: a review." Composite Structures 236 (2020): 111920. [17] Teijin Carbon. Tenax filament yarn. teijincarbon.com. https://www.teijincarbon.com/fileadmin/user_upload/Datenbl%C3%A4tter/Filament_Yarn/Prod uct_Data_Sheet_TSG01en__EU_Filament_.pdf. Accessed June 1, 2025. [18] Hexcel. HexTow AS4 carbon fiber. hexcel.com. https://www.hexcel.com/user_area/content_media/raw/AS4_HexTow_DataSheet.pdf. Accessed June 1, 2025. [19] Toray. T700G standard modulus carbon fiber. https://www.toraycma.com/wpcontent/uploads/T700G-Technical-Data-Sheet-1.pdf. Accessed June 1, 2025. [20] National Composites Center. Composites innovation in aircraft wing design and manufacture The Airbus Wing of Tomorrow program. https://www.nccuk.com/sectors/aerospace/wing-of-tomorrow/. Accessed June 1, 2025. [21] Markus Schneider, and Daria Bietenbeck . Chemical and Mechanical Correlation Between Carbon Fibers and Thermoplastic UD-Tapes. SAMPE 2017 - Seattle WA - May 22-25 / 2017. [22] RCF Technologies. RCF Technologies’ Reusable Inflatable High Temp Bladder: The Future of Manufacturing Thermoplastics .https://www.rcftechnologies.com/rcf-technologies-reusableinflatable-high-temp-bladder-the-future-of-manufacturing-thermoplastics/. Accessed June 1, 2025.

Conference: CAMX 2025

Publication Date: 2025/09/08

SKU: 172

Pages: 24

Price: $48.00