Title: Long Short-Term Memory (LSTM) based Neural Network Model for Optimizing Polymer Composite Manufacturing using Autoclave

Authors: Sourav Bolar, Steven Corns, Nayan Pundhir, and K. Chandrashekhara

DOI: 10.33599/nasampe/c.25.91

Abstract: To enhance the efficiency of polymer composite by autoclave curing, this work introduces a Long Short-Term Memory (LSTM) neural network capable of forecasting temperature profiles with high accuracy. The model predicts time-series data gathered from 16 thermocouples positioned across three composite panels during a typical cure cycle. By using augmentation techniques such as jittering, time scaling, and temporal shifts, the model's predictive performance and generalizability were significantly improved. The optimal sequence length was identified as 30-time steps, offering a balance between computational demand and accuracy. With a coefficient of determination (R²) nearing 0.987. These results indicate the model’s promise in enabling real-time control and dynamic process adjustments. This approach supports the goal of minimizing cycle duration and energy use while ensuring consistent curing—crucial for defect prevention. The technique holds value in aerospace and other precision-driven industries, where optimized composite curing is vital for quality and performance.

References: [1] Rangapuram, M., Dasari, S. K., Abutunis., Abdulaziz, Chandrashekhara, K., Lua, J., and Li, R., "Experimental and numerical investigation of heat evolution inside the autoclave for composite manufacturing," Composites and Advanced Materials, Vol. 33, pp. 1-10, 2024. https://doi.org/10.1177/26349833241273506. [2] Zhao, R., Wang, J., Yan, R., and Mao, K., "Machine health monitoring with LSTM networks," 2016 10th International Conference on Sensing Technology (ICST), Nanjing, China, pp. 1–6, 2016. https://doi.org/10.1109/ICSensT.2016.7796266. [3] Aksan, F., Li, Y., Suresh, V., and Janik, P., "CNN-LSTM vs. LSTM-CNN to predict power flow direction: A case study of the high-voltage subnet of Northeast Germany." Sensors, Vol. 23, pp. 901–915, 2023. https://doi.org/10.3390/s23020901. [4] Ren, B., "The use of machine translation algorithm based on residual and LSTM neural network in translation teaching," Plos one, Vol. 15, pp. 1-16, 2020. https://doi.org/10.1371/journal.pone.0240663. [5] Bouktif, S., Fiaz, A., Ouni, A., and Serhani, M. A., "Optimal deep learning LSTM model for electric load forecasting using feature selection and genetic algorithm: Comparison with machine learning approaches." Energies, Vol. 11, pp 1-20, 2018. https://doi.org/10.3390/en11071636. [6] Wang, J., Zhang, J., and Wang, X., "Bilateral LSTM: A two-dimensional long short-term memory model with multiple memory units for short-term cycle time forecasting in reentrant manufacturing systems." IEEE Transactions on Industrial Informatics, Vol. 14, pp. 748-758, 2018. https://doi.org/10.1109/TII.2017.2754641. [7] Zhang, H., Zhang, Q., Shao, S., Niu, T., and Yang, X., "Attention-based LSTM network for rotatory machine remaining useful life prediction." IEEE Access, Vol. 8, pp. 157944157957, 2020. https://doi.org/10.1109/ACCESS.2020.3010066. [8] Shah, M., Vakharia, V., Chaudhari, R., Vora, J., Pimenov, D. Y., and Giasin, K., "Tool wear prediction in face milling of stainless steel using singular generative adversarial network and LSTM deep learning models." International Journal of Advanced Manufacturing Technology, Vol. 121, pp. 723–736, 2022. https://doi.org/10.1007/s00170-022-09356-0. [9] Van, Houdt, G., Mosquera, C., and Nápoles, G., "A review on the long short-term memory model," Artificial Intelligence Review, Vol. 53, pp. 5929–5955, 2020. https://doi.org/10.1007/s10462-020-09838-1. [10] Abiodun, O. I., Jantan, A., Omolara, A. E., Dada, K. V., Umar, A. M., and Linus, O. U., “Enhancing LSTM models with self-attention and stateful training”, International Journal of Machine Learning and Cybernetics, Vol. 12, pp. 2633-2648, 2021. https://doi.org/10.1007/s13042-021-01376-5. [11] Li, Z., Li, J., and Wang, K., "A deep learning approach for anomaly detection based on SAE and LSTM in mechanical equipment," International Journal of Advanced Manufacturing Technology, Vol. 103, pp. 499–510, 2019. https://doi.org/10.1007/s00170-019-03557-w. [12] Liu, Y. C., Li, K. Y., and Tsai, Y. C., "Spindle thermal error prediction based on LSTM deep learning for a CNC machine tool," Applied Sciences, Vol. 11, pp. 1-15, 2021. https://doi.org/10.3390/app11125444.

Conference: CAMX 2025

Publication Date: 2025/09/08

SKU: 91

Pages: 12

Price: $24.00