Title: STRETCH-STEERING OF ALIGNED DISCONTINOUS FIBER TAPES ON HIGLY CURVED PATHS USING AUTOMATED FIBER PLACEMENT

Authors: Alexander Legenstein, Lukas Füssel, John Tierney, John W. Gillespie Jr., Dirk Heider, Thomas A. Cender

DOI: 10.33599/nasampe/s.23.0161

Abstract: Tailored universal Feedstock for Forming (TuFF) is a highly aligned discontinuous fiber composite material. A TuFF lamina can be stretched in the fiber direction at processing temperatures due to discontinuous fiber format. This deformation mode allows the production of complex shapes while maintaining high mechanical properties. Steering of continuous fiber materials are limited to a large minimum steering radius to minimize compression wrinkle defects. In-situ stretching of TuFF tape during Laser Assisted-Automated Fiber Placement (LA-AFP) has demonstrated tape steerability over an order of magnitude beyond the current state of the art. This paper develops a methodology to quantify the material strain and placement accuracy for stretch-steered TuFF tape to systematically optimize process variables. A methodology is developed for patterning TuFF tape (3 mm long IM7/PEI, 57% FVF) for reliably measuring the axial and transverse strain after tape placement using photogrammetry. The measurements also quantify the variability in strain components along the tape length. The results are shown to give good agreement with the theoretical prediction used to control the LA-AFP process. It is also shown that by optimally placing the center of rotation of the placement head at the nip-point (where tape is welded to the substrate) the placement accuracy and geometric conformity is two orders of magnitude beyond the current state of the art - 12.5 mm wide tape on a 50 mm radius of curvature - can be achieved without identifiable defects.

References: [1] Stodieck O, Cooper JE, Weaver PM, Kealy P. Improved aeroelastic tailoring using tow-steered composites. Composite Structures 2013;106:703–15. [10.1016/j.compstruct.2013.07.023] [2] Lopes CS, Gürdal Z, Camanho PP. Variable-stiffness composite panels: Buckling and first-ply failure improvements over straight-fibre laminates. Computers & Structures 2008;86(9):897–907. [10.1016/j.compstruc.2007.04.016] [3] Clancy G, Peeters D, Oliveri V, Jones D, O'Higgins RM, Weaver PM. A study of the influence of processing parameters on steering of carbon Fibre/PEEK tapes using laser-assisted tape placement. Composites Part B: Engineering 2019;163:243–51. [10.1016/j.compositesb.2018.11.033] [4] Lozano GG, Tiwari A, Turner C, Astwood S. A review on design for manufacture of variable stiffness composite laminates. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 2016;230(6):981–92. [10.1177/0954405415600012] [5] Rajasekaran A, Shadmehri F. Steering of carbon fiber/PEEK tapes using Hot Gas Torch-assisted automated fiber placement. Journal of Thermoplastic Composite Materials 2022. [10.1177/08927057211067962] [6] Kim BC, Weaver PM, Potter K. Manufacturing characteristics of the continuous tow shearing method for manufacturing of variable angle tow composites. Composites Part A: Applied Science and Manufacturing 2014;61:141–51. [10.1016/j.compositesa.2014.02.019] [7] Yarlagadda S, Deitzel J, Heider D, Tierney J, Gillespie Jr. JW. Tailorable Universal Feedstock for Forming (TuFF): Overview and Performance. In: SAMPE 2019 - Charlotte, NC. Proceedings; 05202019; 2019. [8] Fidlow H, Cender TA, Simacek P, Yarlagadda S, Advani SG. Extensional viscosity of thermoplastic TuFF composites in stretch forming process. In: SAMPE 2022 - Charlotte, NC. Proceedings; 2022. [9] Cender TA, Fidlow H, Yarlagadda S, Heider D, Simacek P, Advani SG et al. Forming limits of TuFF Composites in stretch forming processes. In: SAMPE 2022 - Charlotte, NC. Proceedings; 2022. [10] Fuessel L, Cender TA, Austermann V, Gillespie Jr. JW, Heider D. Tow Steering of stretchable TuFF thermoplastic tape with laser tape placement. In: SAMPE 2022 - Charlotte, NC. Proceedings; 2022. [11] Rajan S, Sutton MA, Wehbe R, Tatting B, Gurdal Z, Kidane A. Measured surface deformation and strains in thin thermoplastic prepreg tapes steered along curved paths without Adhesion Using StereoDIC. Exp Mech 2019;59(4):531–47. [10.1007/s11340-019-00478-3] [12] Rajan S, Sutton MA, Wehbe R, Tatting B, Gürdal Z, Kidane A et al. Experimental investigation of prepreg slit tape wrinkling during automated fiber placement process using StereoDIC. Composites Part B: Engineering 2019;160:546–57. [10.1016/j.compositesb.2018.12.017]

Conference: SAMPE 2023

Publication Date: 2023/04/17

SKU: TP23-0000000161

Pages: 14

Price: $28.00