Title: Characterization of A Test Bench System for Continuous Resistance Welding of Thermoplastic Composite Joints

Authors: Jakub Stanczak, Julieta Barroeta Robles, Marc Palardy-Sim, Steven Roy, Marc-André Octeau, Hugo Laurin, François Ferland, Henri Roger Junior Elame, and Ali Yousefpour, Stephen Atkinson, Scott Nesbitt, Reza Vaziri, and Anoush Poursartip, Manuel Endrass, Lars Larsen, and Michael Kupke

DOI: 10.33599/nasampe/s.24.0121

Abstract: Thermoplastic composites (TPCs) are increasingly popular in aerospace structures due to their high stiffness-to-weight ratio, fracture toughness, and weldability. Continuous resistance welding (CRW) can yield high-strength joints in applications with high aspect ratio parts, such as longitudinal or circumferential stiffeners in an aircraft fuselage. In CRW, an electric current is applied locally by an end-effector moving along a continuous conductive implant where temperature is increased via the Joule effect. This implant is placed at the interface to locally melt the TPC and obtain a structural joint. The end-effector also applies consolidation pressure to ensure intimate contact is maintained during melting and solidification. Since the weld interface temperature cannot be measured directly, a physics-based finite element model is used to predict this critical parameter and control the process by manipulating power, pressure, and speed. This paper focuses on the characterization of a CRW system on a test bench to provide experimental data for validation of the physics-based control model. The influence of weld parameters on the welding current are studied. Understanding electrical behavior is critical to attain high quality welds with temperatures that are consistently within the process window across the weld interface. Factors influencing the electrical behavior include electrode contact resistances and heating element dimensions.

References: [1] J. B. Robles, M. Dubé, P. Hubert and A. Yousefpour, ""Repair of thermoplastic composites: an overview,"" Advanced Manufacturing: Polymer & Composites Science, vol. 8, no. 2, pp. 68-96, 2022. [2] A. Yousefpour, M. Hojjati and J.-P. Immarigeon, ""Fusion bonding/welding of thermoplastic composites,"" Journal of Thermoplastic Composite Materials, vol. 17, no. 4, pp. 303-341, 2004. [3] German Aerospace Center, ""Aviation - New technology for the manufacture of CFRP components,"" 25 April 2018. [Online]. Available: https://www.dlr.de/en/latest/news/2018/2/20180425_aviation-new-technology-for-the-manufacture-of-cfrp-components_26940. [Accessed November 2023]. [4] S. L. Veldman, P. Kortbeek, P. C. Wölcken, R. Herrmann, J. Kos and I. V. Fernandez, ""Development of a multifunctional fuselage demonstrator,"" in Aerospace Europe Conference, Bordeaux, 2020. [5] M. Endrass, ""Towards continuous resistance welding for full-scale aerospace components,"" in SAMPE Europe, Amsterdam, 2020. [6] S. Atkinson, S. Nesbitt, R. Vaziri and A. Poursartip, ""A process simulation framework for in-line control of continuous resistance welding,"" in Society for the Advancement of Materials and Process Engineering (SAMPE), Seattle, WA, 2023. [7] A. Yousefpour and M-A.Octeau, ""Resistance welding of thermoplastics"". Canada Patent CA 2604307, 2013. [8] M. Palardy-Sim, J. B. Robles, M.-A. Octeau, S. Roy, A. Yousefpour, S. Atkinson, S. Nesbitt, R. Vaziri, A. Poursatip, M. Endrass, L. Larsen and M. Kupke, ""Benchtop continuous resistance welding of structural thermoplastic composite joints,"" in Society for the Advancement of Materials and Process Engineering, Seattle, WA, 2023. [9] Solvay, ""Technical data sheet, APC-2 PEEK thermoplastic polymer prepreg,"" 2011. [10] H. Shi, I. F. Villegas, M.-A. Octeau, H. E. N. Bersee and A. Yousefpour, ""Continuous resistance welding of thermoplastic composites: Modelling of heat generation and heat transfer,"" Composites: Part A, vol. 70, pp. 16-26, 2015. [11] G. Tuttle, ""Contact resistance and TLM measurements,"" 2012. [12] P. D. Harvey, Engineering Properties of Steel, American Society for Metals, 1982. [13] I. Zammar, ""A three-dimensional transient model for heat transfer in thermoplastic composites during continuous resistance welding,"" Advanced Manufacturing: Polymer and Composites Science, vol. 3, no. 1, pp. 32-41, 2017. [14] M. Dube, P. Hubert, A. Yousefpour and J. Denault, ""Resistance welding of thermoplastic composites skin/stringer joints,"" Composites Part A: Applied Science and Manufacturing, vol. 38, no. 12, pp. 2541-2552, 2007. [15] I. F. Villegas and H. E. Bersee, ""Characterisation of a metal mesh heating element for closed-loop resistance welding of thermoplastic composites,"" Thermoplastic Composite Materials, vol. 28, no. 1, pp. 46-65, 2015.

Conference: SAMPE 2024

Publication Date: 2024/05/20

SKU: TP24-0000000121

Pages: 15

Price: $30.00