Title: Post-Deployment Characterization of Glass Fiber-Reinforced Thermoset and Thermoplastic Composite Tidal Turbine Blades

Authors: Paul Murdy, Ariel Lusty, Robynne Murray, Scott Hughes, Ryan Beach

DOI: 10.33599/nasampe/s.24.0155

Abstract: In 2021, the National Renewable Energy Laboratory (NREL) supported Verdant Power with the most successful tidal energy deployment in U.S. history. Three of their Gen5d 5 m turbines were deployed as part of the Roosevelt Island Tidal Energy project. Initially, the three rotors initially deployed were manufactured from glass fiber-reinforced epoxy composites. Midway through the deployment, one rotor was replaced with one manufactured at NREL. The new rotor utilized a novel infusible thermoplastic resin system. Since the deployment, one epoxy rotor and one thermoplastic rotor were returned to NREL for continued materials and manufacturing research. The two rotors underwent full-scale structural testing before being sectioned and cut into specimens for a variety of manufacturing quality tests, thermomechanical characterization, and evaluation of material performance in marine environments to understand the key differences between the fiberglass-reinforced epoxy and Elium composites used for the respective rotors. Matrix burn-off tests showed that the Elium blades had a considerably higher fiber volume fraction compared to the epoxy blades (61% vs. 49%). Environmental aging of the specimens showed that the epoxy laminates absorbed more water over the conditioning period; however, it was determined that the Elium laminates had higher diffusion coefficients, so they initially absorbed water faster. Finally, one full epoxy blade and one full Elium blade were conditioned at ambient temperatures for up to 11 months, while periodic mass measurements were taken. The datasets were extrapolated to assume a full 20-year operational life span, and it was determined that the blades would not reach full saturation during that time span.

References: Haas, K.A.; Fritz, H.M.; French, S.P.; Smith, B.T.; Neary, V. Assessment of Energy Production Potential from Tidal Streams in the United States; United States, 2011-06-29 2011. DOI: https://doi.org/ 10.2172/1219367 2.Jacobson, P.T.; Hagerman, G.; Scott, G. Mapping and Assessment of the United States Ocean Wave Energy Resource; United States, 2011-12-01 2011. DOI: https://doi.org/10.2172/1060943 3.Alam, P.; Robert, C.; Ó Brádaigh, C.M. Tidal turbine blade composites - A review on the effects of hygrothermal aging on the properties of CFRP. Composites Part B: Engineering 2018, 149, 248-259. DOI: https://doi.org/10.1016/j.compositesb.2018.05.003 4.McEwen, L.N.; Evans, R.; Meunier, M. Cost-Effective Tidal Turbine Blades. In Proceedings of the 4th International Conference on Ocean Energy, Dublin, Ireland, 2012. 5.Murdy, P.; Hughes, S.; Miller, D.; Presuel-Moreno, F.; Bonheyo, G.; Hernandez-Sanchez, B.; Gunawan, B. Subcomponent Validation of Composite Joints for the Marine Energy Advanced Materials Project; United States, 2023-01-11 2023. DOI: https://doi.org/10.2172/1909582 6.Murdy, P.; Hughes, S.; Barnes, D. Characterization and repair of core gap manufacturing defects for wind turbine blades. Journal of Sandwich Structures & Materials 2022, 24, 2083-2100. DOI: https://doi.org/10.1177/10996362221122046 7.Murdy, P.; Hughes, S.; Miller, D.A.; Presuel-Moreno, F.J.; Bonheyo, G.T.; Gunawan, B.; Hernandez-Sanchez, B.A. Static and Fatigue Characterization of Large Composite T-Bolt Connections in Marine Hygrothermal Environments. Journal of Marine Science and Engineering 2023, 11. DOI: https://doi.org/10.3390/jmse11122309 8.Miller, D.A.; Samborsky, D.D.; Stoffels, M.T.; Voth, M.M.; Nunemaker, J.D.; Newhouse, K.J.; Hernandez-Sanchez, B.A. Summary of Marine and Hydrokinetic (MHK) Composites Testing at Montana State University; United States, 2020-09-28 2020. DOI: https://doi.org/10.2172/1668132 9.La Rosa, A.D.; Blanco, I.; Banatao, D.R.; Pastine, S.J.; Björklund, A.; Cicala, G. Innovative Chemical Process for Recycling Thermosets Cured with Recyclamines® by Converting Bio-Epoxy Composites in Reusable Thermoplastic—An LCA Study. Materials 2018, 11. DOI: https://doi.org/10.3390/ma11030353 10.Wang, C.; Singh, A.; Rognerud, E.G.; Murray, R.; Musgrave, G.M.; Skala, M.; Murdy, P.; DesVeaux, J.S.; Nicholson, S.R.; Harris, K.; et al. Synthesis, characterization, and recycling of bio-derivable polyester covalently adaptable networks for industrial composite applications. Matter 2023. DOI: https://doi.org/10.1016/j.matt.2023.10.033 11.Davies, P.; Arhant, M. Fatigue Behaviour of Acrylic Matrix Composites: Influence of Seawater. Applied Composite Materials 2019, 26, 507-518. DOI: https://doi.org/10.1007/s10443-018-9713-1 12.Cousins, D.S.; Suzuki, Y.; Murray, R.E.; Samaniuk, J.R. Recycling glass fiber thermoplastic composites from wind turbine blades. Journal of Cleaner Production 2019, 209, 1252-1263, DOI: https://doi.org/10.1016/j.jclepro.2018.10.286 13.Murray, R.E.; Beach, R.; Barnes, D.; Snowberg, D.; Berry, D.; Rooney, S.; Jenks, M.; Gage, B.; Boro, T.; Wallen, S.; et al. Structural validation of a thermoplastic composite wind turbine blade with comparison to a thermoset composite blade. Renewable Energy 2021, 164, 1100-1107. DOI: https://doi.org/10.1016/j.renene.2020.10.040 14.Davies, P.; Arhant, M.; Grossmann, E. Seawater ageing of infused flax fibre reinforced acrylic composites. Composites Part C: Open Access 2022, 8, 100246. DOI: https://doi.org/10.1016/j.jcomc.2022.100246 15.Murray, R.E.; Simms, A.; Bharath, A.; Beach, R.; Murphy, M.; Kilcher, L.; Scholbrock, A. Toward the Instrumentation and Data Acquisition of a Tidal Turbine in Real Site Conditions. Energies 2023, 16. DOI: https://doi.org/10.3390/en16031255 16.Murray, R.E.; Jenne, S.; Snowberg, D.; Berry, D.; Cousins, D.S. Techno-economic analysis of a megawatt-scale thermoplastic resin wind turbine blade. Renewable Energy 2019, 131, 111-119. DOI: https://doi.org/10.1016/j.renene.2018.07.032 17.Shen, C.-H.; Springer, G.S. Moisture Absorption and Desorption of Composite Materials. Journal of Composite Materials 1976, 10, 2-20. DOI: https://doi.org/10.1177/002199837601000101 18.Fang, Y.; Wang, K.; Hui, D.; Xu, F.J.; Liu, W.Q.; Yang, S.L.; Wang, L. Monitoring of seawater immersion degradation in glass fibre reinforced polymer composites using quantum dots. Composites Part B-Engineering 2017, 112, 93-102. DOI: https://doi.org/10.1016/j.compositesb.2016.12.043

Conference: SAMPE 2024

Publication Date: 2024/05/20

SKU: TP24-0000000155

Pages: 15

Price: $30.00