Title: Tribute to Frank Abdi: Advancements in Composite Material Modeling and Impact on Simulation Software

Authors: Zafer Gürdal

DOI: 10.33599/nasampe/s.24.0267

Abstract: This paper pays homage to Frank Abdi, a distinguished figure in aerospace engineering whose contributions have significantly influenced the field. It aims to honor and analyze Abdi's major contributions across several domains: Composite Material Modeling, Simulation Software, Failure Analysis, and Optimization, and additional areas where he made significant impacts. By conducting a thorough review of his publications, patents, and the software he developed, the paper investigates the innovative methods Abdi devised for predicting the mechanical behavior of composite materials. It examines the complexities of simulation software such as GENOA and MCQ, emphasizing their significance across various industries, from aerospace to automotive. Furthermore, the paper examines Abdi's pivotal work in failure analysis and engineering optimization, which have profoundly affected the design and analysis of composite structures. Case studies and practical applications are referenced to highlight the lasting relevance of his contributions. The paper concludes by encapsulating Abdi's monumental legacy in research, industrial applications, and education, along with other areas he enriched with his work.

References: 1.F. Abdi, L. Minnetyan, “Development of GENOA Progressive Failure Parallel Processing Software Systems”, NASA CR—1999-209404, Glenn Research Center, National Technical Information Service, Springfield, VA 22100, December 1999. 2.MR Talagani, S DorMohammadi, R Dutton, C Godines, H Baid, F. Abdi, ""Numerical simulation of big area additive manufacturing (3D printing) of a full-size car,"" SAMPE Journal, 51 (4), 27-36, 2015. 3.F. Abdi, R Miraj, C Tam, IR Rios, V Harik, "" AM part qualification by ICME analysis and real time NDE monitoring,"" Proc. Of the 11th Model Based Enterpise Summit (MBE 2020), Gaithersburg, Maryland, USA, March 31-April 2, 2020, pp. 5-21. 4.P Kim, H Baid, A Hassen, A Kumar, J Lindahl, D Hoskins, C Ajinjeru, F. Abdi, ""Analysis on part distortion and residual stress in big area additive manufacturing with carbon fiber-reinforced thermoplastic using de-homogenization technique,"" Oak Ridge National Lab.(ORNL), Oak Ridge, TN (United States), 2019, doi:10.33599/nasampe/c.19.0694. 5.C Godines, S DorMohammadi, F. Abdi, D Huang, I Roche Rios, ""3D print-material and process model and effect of defects on part performance, Proceedings of the Science in the Age of Experience Simulia User Conference, Boston, MA, USA, 18–21 June 2018. 6.V Kunc, B Compton, S Simunovic, C Duty, L Love, B Post, C Blue, F.Abdi, ""Modeling of large scale reinforced polymer additive manufacturing,"" ANTEC 2015, Society of Plastics Engineering (SPE) Proceedings of the Technical Conference, Orlando FL, March 2015. 7.F. Abdi, P Yavari, V Harik, C Godines, ""Material allowable generation and AM process parameters effect on porosity,"" Coatings 10 (7), 625, June 2020, https://doi.org/10.3390/coatings10070625. 8.F. Abdi, E Clarkson, C Godines, S DorMohammadi, ""AB basis allowable test reduction approach and composite generic basis strength values,"" 18th AIAA Non-Deterministic Approaches Conference, 0951, 2016. 9.G Abumeri, F. Abdi, M Baker, M Triplet, J Griffin, ""Reliability based design of composite over-wrapped tanks,"" SAE Technical Paper, 2007. 10.F.Abdi, H Ide, VJ Shankar, J Sobieszczanski-Sobieski, ""Optimization of nonlinear aeroelastic tailoring criteria,"" ICAS Congress, Jerusalem, Israel, August 28, 1988. 11.H Ide, F. Abdi, V Shankar, ""CFD sensitivity study for aerodynamic/control optimization problems,"" 29th Structures, Structural Dynamics and Materials Conference, 2336, 1988. 12.N Moazami, F. Abdi, GN Morscher, C Godines, L Zawada, G Jefferson, ""Design framework for optimized multifunctional coatings,"" Turbo Expo: Power for Land, Sea, and Air 84119, V003T02A004, 2020. 13.G Abumeri, J Paquette, F. Abdi, ""Durability and reliability of wind turbine composite blades using robust design approach,"" 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, Denver, CO. 4-7 April 2011. 14.F. Abdi, C Song, L Kong, N Li, Z Wu, HK Baid, D Huang, ""Bird strike certification by analysis of ARJ21 multi-functional vertical stabilizer,"" AIAA Aerospace Sciences Meeting, 0766, 2018. 15.F. Abdi, J Surdenas, N Munir, J Housner, R Keshavanarayana, “Computational approach toward advanced composite material qualification and structural certification,” Book Chapter in Virtual Testing and Predictive Modeling: For Fatigue and Fracture Mechanics, pp. 137-185, 2009, Springer Publishers. 16.F. Abdi, D Thompson, “2D/3D Oxide/Oxide Ceramic Matrix Composites Life Prediction Methods: Virtual Characterization of Mechanical Properties, and Virtual Testing of Structural Component,” Turbo Expo: Power for Land, Sea, and Air 4790, pp. 357-365 17.F. Abdi, S. Zadeh, M. Shahab, R. Ragalini, “Collaborative Virtual Testing for Manufacturing & Life Cycle Management,” Alpha Star Corporation, Long Beach, California. https://citeseerx.ist.psu.edu/document?repid=rep1&type=pdf&doi=2949eef14de86abbd5b5148198c36cbbe66a0a89. 18.R. Iyer, A.S. Mosallam, F. Abdi, “Virtual Testing and Progressive Failure Analysis of Army Composite Bridge,” FRP Composites in Civil Engineering – CICE 2004 – Seracino (ed), Taylor & Francis Group, London. 19.F. Abdi, T Castillo, D Huang, V Chen, A Delmondo, “Virtual testing of the X37 space vehicle”, International SAMPE Symposium and Exhibition, SAMPE 2002 - Long Beach CA, pp. 1298-1306, May 12-16, 2002 20.F. Abdi, C. Godines, GN Morscher, S Choi, M Villa Montero, Z Han, “Foreign object damage and fatigue after impact simulations on flat and curved hi nicalon and hi nicalon type s (mi sic) specimens at room and 1200 c using building block approach,” ASME Turbo Expo 2016: Power for Land, Sea, and Air, https://doi.org/10.1115/GT2016-58086. 21.B Farahmand, F. Abdi, “Probabilistic Fracture Toughness and Fatigue Crack Growth Estimation resulting From Material Uncertainties”, Book Chapter: Probabilistic Aspects of Life Prediction, ASTM International, 2004. https://doi.org/10.1520/STP11279S. 22.F. Abdi, “Concurrent Probabilistic Structural Analysis Methods for Composites,” NASA CR-198502, NASA Lewis Research Center, Cleveland, Ohio 44135-3191, July 1996. 23.F. Rognin, F. Abdi, V Kunc, M Lee, K Nikbin, “Probabilistic methods in predicting damage under multi-stage fatigue of composites using load block sequences,” Procedia Engineering 1 (1), pp. 55-58, 2009. 24.L Minnetyan, C Chamis, F.Abdi, D Huang, “Probabilistic cyclic fatigue of composite structures,” 19th AIAA Applied Aerodynamics Conference, 1375, 2001. 25.C. Chamis, L. Minnetyan, B. Mauget, D. Huang, and F. Abdi, “Probabilistic Assessment of Fracture Progression in Composite Structures,” NASA TM—1999-209269, Aircraft Structural Integrity Program Conference, United Stated Air Force, San Antonio, Texas, December 1-3, 1998, Publ: December 1999. 26.L. Minnetyan, F. Abdi, C.C. Chamis, “Probabilistic Composite Morphing Structure Simulation,” Proc. Of the 50th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, Palm Springs, California, pp. 2009-2241, 4 - 7 May 2009. 27.L Minnetyan, F. Abdi, C Chamis, “Probabilistic assessment of fracture in stitched and unstitched composite laminates,” 39th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 1998. 28.F. Abdi, “Concurrent Probabilistic Simulation of High Temperature Composite Structural Response,” NASA CR-198502, NASA Lewis Research Center, July1996. 29.F. Abdi, C. Godines, S. DorMohammadi, L. Minnetyan, “Static Validation of Composite Open Hole Analysis Technique for Standard and Nonstandard Laminate - Part 1,” AIAA-SciTech 2015 Conference, Kissimmee, Florida, January 2015, DOI: 10.2514/6.2015-1878. 30.C.C. Chamis, F. Abdi, M. Garg, L. Minnetyan, H. Baid, D. Huang, J. Housner, “Micromechanics-based progressive failure analysis prediction for WWFE-III composite coupon test cases,” Journal of Composite Materials 47 (20-21), 2695-2712. 31.D Cardenas, H Elizalde, P Marzocca, F. Abdi, L Minnetyan, O Probst, “Progressive failure analysis of thin-walled composite structures.” Composite structures 95, 53-62 32.S DorMohammdi, C Godines, F. Abdi, D Huang, M Repupilli, L Minnetyan, “Damage-tolerant composite design principles for aircraft components under fatigue service loading using multi-scale progressive failure analysis,” Journal of Composite Materials 51 (15), 2181-2202. 33.C Godines, S DorMohammadi, F. Abdi, M Villa Montero, D Huang, “Damage tolerant composite design principles for aircraft components under static service loading using multi-scale progressive failure analysis,” Journal of Composite Materials 51 (10), 1393-1419. 34.M Garg, F.Abdi, S McHugh, “Analyzing Interlaminar Shear Strength of Multiscale Composites via Combined Finite Element and Progressive Failure Analysis Approach,” Characterization of Nanocomposites: Technology and Industrial Applications 35.M Garg, F.Abdi, M Falugi, G Abumeri, “Predicting bearing strength of fiber metal laminates via progressive failure analysis,” 52nd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials … 36.PK Gotsis, CC Chamis, K David, F. Abdi, “Progressive fracture of laminated composite stiffened plate,” Theoretical and applied fracture mechanics 51 (2), 144-147 37.A Abdul-Aziz, F.Abdi, RT Bhatt, JE Grady, “Durability modeling of environmental barrier coating (EBC) using finite element based progressive failure analysis,” Journal of Ceramics 2014 38.AJ Siddens, J Bayandor, F. Abdi, “Soft impact damage prognosis of F-16 canopy using progressive failure dynamic analysis,” Journal of Aircraft 51 (6), 1959-1965 39.F. Abdi, L. Minnetyan, “Progressive Fracture of Braided Composites,” NASA Lewis, SBIR Phase I Final Report 1, 996 40.S. Shah, J. Bayandor, F. Abdi, A. Najafi, “Micro mechanics-based prognosis of progressive dynamic damage in advanced aerospace composite structures,” International Congress of the Aeronautical Sciences 41.V. Sokolinsky, J. Housner, J. Surdenas, F. Abdi, “Progressive failure analysis of shuttle reinforced carbon-carbon plate specimens,” 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials 42.R. Iyer, A. Mosallam, F. Abdi, “Progressive failure analysis of Composite Army Bridge,” The Second International Conference on FRP Composites in Civil Engineering, 8-10 43.AJ Siddens, J Bayandor, F. Abdi, “Coupled micromechanics-finite element progressive failure dynamic analysis approach: F-16 canopy case study,” the proceedings of the 28th International Congress of the Aeronautical 44.X Su, F. Abdi, “Progressive failure analysis of RLV laminates of IM7/PETI-5 at high, room, and cryogenic temperatures,” 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials

Conference: SAMPE 2024

Publication Date: 2024/05/20

SKU: TP24-0000000267

Pages: 13

Price: $26.00