Title: Manufacturing PMMA Thermoplastic Prepreg using a Lab-scale Solvent Prepreg Treater

Authors: Luke Grant, Sean Ryan, Nicole Larson

DOI: 10.33599/nasampe/s.25.0022

Abstract: Thermoplastic composites are in increasing demand in the automotive and aerospace industries due to their increased recyclability, reducing high energy waste typical with thermoset-based composite materials. Alternative methods to manufacture thermoplastic prepreg are required to meet growing demand and reduce startup costs of developing thermoplastic prepreg manufacturing infrastructure [1]. In this research, poly(methyl methacrylate), PMMA, thermoplastic prepreg was manufactured using a lab-scale, solvent prepreg treater [2]. Liquid methyl methacrylate monomer and oligomer, Elium C595E, was used as a matrix in manufactured thermoplastic prepreg using fiberglass, flax, and linen fibers. Prepreg treater processing parameters and polymerization catalysts were initially determined on a benchtop scale as proof of concept. Manufacturing was successfully upscaled to a lab-scale treater for medium-scale production of prepreg material. Prepreg matrix degree of polymerization was measured using DSC, and resin content was measured using a combination of TGA and areal weight averages. The performance of the prepreg was quantified using composite tensile, short beam shear, and ASTM flexural bar standards. The above test results show that Elium C595E resin can be used effectively in a solvent prepreg treater system to manufacture PMMA-based thermoplastic composite material at a large scale.

References: 1. DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., ... & Zhang, W. (2018). Additive manufacturing of metallic components–process, structure and properties. Progress in materials science, 92, 112-224 2. Frazier, W. E. (2014). Metal additive manufacturing: a review. Journal of Materials Engineering and performance, 23, 1917-1928. 3. Wernick, E., Baker, J., Harimker, S., & Vaidyanathan, R. (2019). A Novel and Fast Method to Qualify and Certify Additively Manufactured Components. CAMX 2019. 4. Yan, F., Xiong, W., & Faierson, E. J. (2017). Grain structure control of additively manufactured metallic materials. Materials, 10(11), 1260. 5. Zuback, J. S., & DebRoy, T. (2018). The hardness of additively manufactured alloys. Materials, 11(11), 2070. 6. Gallmeyer, T. G., Moorthy, S., Kappes, B. B., Mills, M. J., Amin-Ahmadi, B., & Stebner, A. P. (2020). Knowledge of process-structure-property relationships to engineer better heat treatments for laser powder bed fusion additive manufactured Inconel 718. Additive Manufacturing, 31, 100977. 7. Liu, B., Ding, Y., Xu, J., Gao, Y., Wang, X., Zhang, H., ... & Sun, F. (2023). Outstanding strength-ductility synergy in Inconel 718 superalloy via laser powder bed fusion and thermomechanical treatment. Additive Manufacturing, 67, 103491. 8. Wang, X., Ding, Y., Gao, Y., Ma, Y., Chen, J., & Gan, B. (2021). Effect of grain refinement and twin structure on the strength and ductility of Inconel 625 alloy. Materials Science and Engineering: A, 823, 141739. 9. Zhang, S., Lin, X., Wang, L., Yu, X., Hu, Y., Yang, H., ... & Huang, W. (2021). Strengthening mechanisms in selective laser-melted Inconel718 superalloy. Materials Science and Engineering: A, 812, 141145. 10. Yavari, M. R., Cole, K. D., & Rao, P. (2019). Thermal modeling in metal additive manufacturing using graph theory. Journal of Manufacturing Science and Engineering, 141(7), 071007. 11. Yavari, R., Smoqi, Z., Riensche, A., Bevans, B., Kobir, H., Mendoza, H., ... & Rao, P. (2021). Part-scale thermal simulation of laser powder bed fusion using graph theory: Effect of thermal history on porosity, microstructure evolution, and recoater crash. Materials & Design, 204, 109685. 12. Riensche, A., Bevans, B. D., Smoqi, Z., Yavari, R., Krishnan, A., Gilligan, J., ... & Rao, P. (2022). Feedforward control of thermal history in laser powder bed fusion: Toward physics-based optimization of processing parameters. Materials & Design, 224, 111351. 13. Yavari, R., Riensche, A., Tekerek, E., Jacquemetton, L., Halliday, H., Vandever, M., ... & Rao, P. (2021). Digitally twinned additive manufacturing: Detecting flaws in laser powder bed fusion by combining thermal simulations with in-situ meltpool sensor data. Materials & Design, 211, 110167. 14. Deshmukh, K., Riensche, A., Bevans, B., Lane, R. J., Snyder, K., Halliday, H. S., ... & Rao, P. (2024). Effect of processing parameters and thermal history on microstructure evolution and functional properties in laser powder bed fusion of 316L. Materials & Design, 244, 113136. 15. Yavari, R., Williams, R., Riensche, A., Hooper, P. A., Cole, K. D., Jacquemetton, L., ... & Rao, P. K. (2021). Thermal modeling in metal additive manufacturing using graph theory–Application to laser powder bed fusion of a large volume impeller. Additive Manufacturing, 41, 101956.

Conference: SAMPE 2025

Publication Date: 2025/05/19

SKU: TP25-0000000022

Pages: 12

Price: $24.00