Title: Lightweight Reinforced Thermoplastic Composite Flat Sheets: Water-resistant Barrier Property and 3D Printability

Authors: Liqing Wei, Ruomiao Wang, Arturo lopez, Mark mason

DOI: 10.33599/nasampe/s.25.0079

Abstract: This paper outlines the production of a lightweight reinforced thermoplastic (LWRT) composite using glass fiber and polypropylene via a wet-laid process. A printable film or water-resistant barrier (WRB) material was laminated onto one surface of the LWRT core, and the composite was then consolidated using calender rolls. This resulted in an LWRT flat sheet or a WRB board with tunable water vapor and liquid water barrier properties. The flat sheets were tested for physical (areal density, ash %, density, and surface energy), mechanical (flexural, flatwise tensile, and film/core adhesion), flame retardancy (FR), water vapor transmission, water resistance, and acoustic properties. Flat sheets with printable film achieved ASTM E84 Class A FR performance, with strong film/core adhesion (> 12 N) and robust Z-direction strength (peak load > 900N). WRB boards demonstrated good adhesion between the WRB material and composite core, with cohesive failure within the WRB during tests. The printable LWRT panel also showed excellent printability and ink adhesion in a digital 3D printing process. The WRB board was water vapor permeable but water impermeable. These LWRT panels have potential applications in recreational vehicles and general building and construction, including use as sidewalls, ceilings, roofing, and sheathing in shear walls.

References: 1. Seneviratne, W., Teoh, J., Thirumurugan, S., Seneviratne, D., and Tomblin, J.: Fiber Patch Placement for High-Rate Manufacturing of Complex Composite Parts. Manufacturing for Affordable Sustainable Composites (MASC), (AFRL report under review, 2025). 2. ASTM International. Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials (ASTM D3039/D3039M-17), 2017. 3. ASTM International. Standard Test Method for Determining the Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture (ASTM D6641-23), 2023. 4. Hashin, Z.: Fatigue failure criteria for unidirectional fiber composites. J. appl. Mech, 47(4), 329-334, 1980. 5. Solvay: CYCOM® 5320-1, PDS CYCOM5320-1_2017_07_24_CR7, 2017. 6. Schaefer, J., Justusson, B., Pike, M., Liguore, S.: ONR High Fidelity Database and Validation Protocols for Structural Failure Mode Characterization, Static Open Hole Tension and Compression. In 32nd Technical Conference of the American Society for Composites, 2017. 7. Içten, B. M., Karakuzu, R.: Progressive failure analysis of pin-loaded carbon–epoxy woven composite plates. In Composites science and technology, 62(9), 1259-1271, 2002. 8. Grunenfelder, L. K., Suksangpanya, N., Salinas, C., Milliron, G., Yaraghi, N., Herrera, S., Kisailus, D.: Bio-inspired impact-resistant composites. In Acta biomaterialia, 10(9), 3997-4008, 2014.

Conference: SAMPE 2025

Publication Date: 2025/05/19

SKU: TP25-0000000079

Pages: 20

Price: $40.00