Title: Polymer Composite Material Screening for a Cryotank Application

Authors: Joseph Pinakidis, Sandi Miller

DOI:

Abstract: Composite cryotanks will play a key role in enabling the next generation of efficient aircraft. Carbon fiber reinforced polymer (CFRP) composites have the benefits of reduced weight and potentially higher structural strength compared to traditional metallic fuel tanks. A material screening study was conducted to inform material selection for liquid hydrogen (LH2) fuel storage. Three composite materials were considered because of their aerospace grade toughness, strength, and existing data to compare against. These materials were a thermoplastic low-melt polyaryletherketone (LM-PAEK)/carbon fiber (CF), thermoset/CF, and hybrid thermoset/thermoplastic polyurethane (TPU) veil/CF composite. Mechanical screening tests included tension, compression, in-plane shear (IPS), and tensile-tensile fatigue (TTF). Each material was tested at both a baseline (no liquid nitrogen/LN2 cycling) and 100 LN2-cycled conditions to determine the knockdown factor, if any, of each material when exposed to environmental loading effects in a cryotank. Results show minimal effects of the LN2-cycling compared against baseline values. The three materials behaved similarly in tension; however, the thermoplastic/CF had the highest IPS toughness. The hybrid thermoset/TPU/CF composite had the lowest IPS strength, compressive strength, and toughness. LN2-cycling had minimal effects on tensile-tensile fatigue performance of the thermoplastic/CF material. Mechanical data was captured to guide material down selection for future commercially viable hydrogen aircraft design.

References: [1] Yusaf, T., Fernandes, L., Abu Talib, A. R., Altarazi, Y. S., Alrefae, W., Kadirgama, K., … & Laimon, M., “Sustainable aviation—Hydrogen is the future.” Sustainability, 14(1), 548, (2022). [2] Diaconu, T. M., “Integration and design of cryogenic hydrogen fuel systems for sustainable commercial aviation.” INCAS Bulletin, 16(4), (2024), pp. 11-27. [3] Otto, M., Chagoya, K. L., Blair, R. G., Hick, S. M., & Kapat, J. S., “Optimal hydrogen carrier: Holistic evaluation of hydrogen storage and transportation concepts for power generation, aviation, and transportation.” Journal of Energy Storage, 55, (2022), 105714. [4] Boddorff, A. K., “Choosing the Right Stuff: Material Selection for Liquid Hydrogen Aircraft Cryotanks.” (No. NASA/TM-20250007133). National Aeronautics and Space Administration, (2025). [5] Hodge, A. J., “Evaluation of microcracking in two carbon-fiber/epoxy-matrix composite cryogenic tanks.” (No. NAS 1.15: 211194, NASA/TM- 20010080458). National Aeronautics and Space Administration, (2001). [6] Manu, M., et al., “Review on development of effective carbon fiber based cryogenic storage tank materials for space applications.” (March 15, 2022). Proceedings of the International Conference on Aerospace & Mechanical Engineering (ICAME 21), Available at SSRN: https://ssrn.com/abstract=4057984 or http://dx.doi.org/10.2139/ssrn.4057984 [7] Dagdag, O., & Kim, H., “Cryogenic Impact on Carbon Fiber-Reinforced Epoxy Composites for Hydrogen Storage Vessels.” Journal of Composites Science, 8(11), (2024), 459. [8] Grogan, D. M., Brádaigh, C. Ó., McGarry, J. P., & Leen, S. B., “Damage and permeability in tape-laid thermoplastic composite cryogenic tanks.” Composites Part A: Applied Science and Manufacturing, 78, (2015), pp. 390-402. [9] McCarville, D. A., Guzman, J. C., Jackson, J. R., & Birkland, J. O., “Design, manufacture and test of cryotank components.” Comprehensive composite materials II, 3(M17-6280), (2017). [10] Jackson, J. R., Vickers, J., & Fikes, J., “Composite cryotank technologies and development 2.4 and 5.5 m out of autoclave tank test results.” (No. M15-4801 NASA/TM- 20150021410). National Aeronautics and Space Administration, (2015). [11] Sápi, Z., & Butler, R., “Properties of cryogenic and low temperature composite materials–A review.” Cryogenics, 111, 103190, (2020). [12] Michel, S. A., Kieselbach, R., & Martens, H. J., “Fatigue strength of carbon fibre composites up to the gigacycle regime (gigacycle-composites).” International journal of fatigue, 28(3), (2006), pp. 261-270. [13] Feng, Y., Ma, B., Zhang, T., Zhang, T., He, Y., & Jiao, S., “Reliability fatigue life and A new S–N curve model of composite laminates under tensile-tensile fatigue load.” Applied Composite Materials, 28(1), (2021), pp. 129-148.

Conference: SAMPE 2026

Publication Date: 2026/04/27

SKU: 20

Pages: 14

Price: $28.00