Technical Papers

A Discrete Approach for Predicting Void Formation During Vacuum Consolidation of Autoclave Composites

Guillaume Seon, Andrew Makeev, Yuri Nikishkov, and Brian Shonkwiler

A Fully Distributed Strain Rosette Using High Definition Fiber Optic Sensing

Elias D. Bearinger, Dan Kominsky, Reginald L. Bryson, and Nur Aida Abdul Rahim

A Mathematical Approach to Manufacturing Process and Systems Modeling Using Geometric Programming

Scott T. Nill, Larissa F. Nietner, and Alexander M. Rubin

A Model for Predicting the Cured Part Thickness of Automated Fiber Placed Composites

Matthew L. Kirby, Christopher J. Madsen, David S. Riha, Christopher T. Palmer, and Paul F. Olsen

A New Tailored UV Based Surface Activation Method for Bonding to Thermoplastics

Sina Chaeichian, Kaspar Schaerer, Ruairi O’Kane, and Michael D. Halbasch

A Numerical and Experimental Approach for Modeling Porosity Due to Entrapped Air and Volatiles Off-gassing During Manufacturing of Composite Structures

Curtis Hickmott, Alireza Forghani, Victoria Hutten, Evan Lorbiecki, Frank Palmieri, Brian Grimsley, Brian Coxon, Goran Fernlund, and Anoush Poursartip

A Simple Analysis Tool to Simulate the Co-cure of Honeycomb Core Composite Sandwich Structures

Navid Niknafs Kermani, Pavel Simacek, and Suresh G. Advani

A Validation Study of a Physics-based Tack Model for an Automated Fiber Placement Process Simulation

Victoria Hutten, Alireza Forghani, Paulo Silva, Curtis Hickmott, Thammaia Sreekantamurthy, Christopher Wohl, Brian Grimsley, Brian Coxon, and Anoush Poursartip

Additive Manufacturing of Flame-retardant Polyamide 6 Nanocomposites Via Fused Filament Fabrication (FFF)

Hao Wu, Abdullah Kafi, Haewon Kim, Rishabh Shah, Stuart Bateman, and Joseph H. Koo

Adhesively Bonded Composite Durability (ABCD) Phase 3

Jason Action, Carl Rousseau, and Jeffery Scheinost

Advancement in the Study of 3D Printable Flame Retardant Polyamide 11 Nanocomposites

William P. Fahy and Joseph H. Koo

Agile Analysis of Manufacturing Cell Costs for Molding of Small Composite Parts

Daniel A. Charles, Michael P. Matlack, and Gail L. Hahn

An Experimental Study of the Creep Behavior of Braided Composites

Ahmed S. Ead, Cagri Ayranci, Jason P. Carey

An Investigation of Dissimilar Material Joining Via Adhesive for Clear Coat to SMC

Saeil Jeon and Bob Zweng

Analysis and Fabrication of Thick Co-Cured Composite Structures

Zeaid Hasan, Jessica Rader, Delphine Turpin, Alec Olson, Ryan St Onge, and Jon Amback

Approaches for Efficient Modeling of the Mechanical Response of Complex Periodic Truss Architectures

Carlos M. Portela, Gregory P. Phlipot, Julia R. Greer, and Dennis M. Kochmann

Approximations By Reduced-Order Models for Nonlinear Flutter of Variable Stiffness Composite Plates

Hamed Akhavan and Pedro Ribeiro

Assessment of a High Temperature Resistance Polyimide as a Self-Sizing Polymer Matrix for Carbon Fiber-Based Composites

Sam Lukubira, Sagar V. Kanhere, Kyle Berger, Adam Haldeman, and Amod Ogale

Assessment of Automated Fiber Placement for the Fabrication of Composite Wind Tunnel Blades

Ray Grenoble, Ramy Harik, Daniel Munden, Joshua Halbritter, Dawn Jegley, and Brian Mason

Automated Fiber Placement Manufactured Composites for Science Applications

Kenneth N. Segal, Charles C. He, Will E. Guin, Justin R. Jackson, Ray W. Grenoble, Thuan N. Nguyen, and Lloyd Nelson

Automated Fiber Placement of Composite Wind Tunnel Blades: Process Planning and Manufacturing

Ramy Harik, Joshua A. Halbritter, Dawn Jegley, Ray Grenoble, and Brian Mason

Automated Fiber Placement of Thermoplastic Materials: Pursuit of Low Porosity Without the Autoclave

Justin Merotte, Denis Cartié, Kevin Henry, Yves Gohens, and Alexandre Hamlyn

Automation of AFP Process Planning Functions: Importance and Ranking

Joshua A. Halbritter, Ramy Harik, Clint Saidy, August Noevere, and Brian W. Grimsley

Ballistic Properties of Polypropylene and Epoxy Based Glass Fiber Reinforced Composites: Experiments and Modeling

Saikanth Paruchuru, and German Reyes-Villanueva

Bio-Based Thermosets Prepared Using Michael Addition of Furan and Isosorbide Building Blocks

Xi Chu, John J.La Scala, and Giuseppe R. Palmese

Carbon Fibers Derived From Mesophase Pitch: Effect of Axial Crystallite Size and Properties

Victor Bermudez and Amod A. Ogale

Carbon Nanotube Coated Fabric-Based Thin and Flexible Pressure Sensors with Ultra-Wide Sensing Range

Sagar M. Doshi, Amit Chaudhari, Colleen Murray, Jill Higginson, and Erik T. Thostenson

Characterization of Adhesion Between Dissimilar Polymer-Matrix Composites

Diana G. Heflin, Joshua Dustin, and Jan-Anders E. Mansson

Characterizing Thermal Expansion of Large-scale 3D Printed Parts

Dylan Hoskins, Vlastimil Kunc, Ahmed Hassen, John Lindahl, and Chad Duty

Characterizing Thermoset Curing Using Rheology

Tianhong T. Chen, and Bharath Rajaram

Closed Loop Recycling of CFRP Into Highly Aligned High Performance Short Fiber Composites Using the TUFF Process

Dirk Heider, John Tierney, Joseph Deitzel, Munetaka Kubota, John Thiravong, Verena Gargitter, Winona Burris, John Morris, Nicholas Shevchenko, Shridhar Yarlagadda, and John W. Gillespie, Jr.

Closed-form Solutions for Predicting Interlaminar Shear Stress and Hygrothermomechanical Normal Stress in Composite Beams with Rectangular and Tubular Cross-sections

Sthanu Mahadev, Wen Chan, Taylor Best, and Reiley Schraeger

Cold Spray Technology for Structural Restoration of Sea-Based Aviation Structural Materials

Saravanan R. Arunachalam and Sarah E. Galyon Dorman

Composites Workforce, The Next Generation Outreach Through the Composite Materials Merit Badge

David L. Stone and Melanie Violette

Compression Experiment and Simulation Study of Shape Memory Alloy Lattice Structure

Sean Chu and Jie Lu

Computational Multiscale Analysis for Interlaminar Reinforcement of Composite Laminates with Radially Grown Carbon Nanotube Architecture

Karthik Rajan Venkatesan and Aditi Chattopadhyay

Computing Methodology for SMC Structures Reinforced By Continuous Fiber Reinforcements

Harald Bachem, Marc Fette, and Eugen Musienko

Continuous Manufacturing Technology of Stampable Thick Organo-Sheet Using Fixed Rollers Double Belt Press

Osuke Ishida, Junichi Kitada, Katsuhiko Nunoani, and Kiyoshi Uzawa

Controlled Topology Toughening Epoxy Via Incorporation of Partially Reacted Substructures

Jian Gao and Giuseppe R. Palmese

Core Movement During Processing of Sandwich Panels

Duncan J. Pawson, and Göran Fernlund

Cure Process Defects in Composite Structures with Sharp Radii

Justin B. Alms, John J. Gangloff, John Walker, and Danielle Grolman

Cyclic Response of Smart Sensing Layer for Insitu Structural Health Monitoring of Composite Materials

Zaffar M. Khan, Saad Nauman, and Mohammad A. Walid

Design for Manufacturing: Laminate Focused Design and Analysis Tools for Automated Composites Manufacturing

Jeron Moore, André Colvin, Sayata Ghose, and Brice Johnson

Design of an Automated Ultrasonic Scanning System for In-situ Composite Cure Monitoring and Defect Detection

Tyler B. Hudson, Frank L. Palmieri, T. Bryce Abbott, Jeffrey P. Seebo, and Eric R. Burke

Design of Variable Stiffness Cylinder with Holes Under Bending for Maximum Buckling Load Using Lamination Parameters

Mazen A. Albazzan, Brian F. Tatting, Ramy Harik, Zafer Gürdal, Adriana W. Blom-Schieber, Mostafa Rassaian, and Steven Wanthal

Design, Manufacturing and Testing of a Rotorcraft Access Panel Door From Recycled Carbon Fiber Reinforced Polyphenylenesulfide

T.A. de Bruijn, G.A. Vincent, J. Meuzelaar, J.P. Nunes, and F.W.J. van Hattum

Desmocomp® – Raw Materials for Pultruded Composites with Excellent Chemical and Weathering Resistance

Liang Chen, James Thompson-Colón, Alan Bushmire, Nathan Chaffin, Dan Williams, Richard Meisenheimer, and Stamo Mentizi

Development of Carbon Composite/Aluminum Liner Hybrid Rocket Motor Case

Yakup Erturan, Kivanc Yurdakul, and Cagri Tasar

Development of Scalable Dynamic Control Architectures for Flexible Composites Manufacturing Work Cells

Steven M. Shewchuk, Ben Halford, Michael P. Matlack, Andrew Sharpe, and Pete Massey

Effect of Graphene Nanoplatelets on Morphology and Property Enhancement of Immiscible Polycarbonate/poly(lactic Acid) Blends

Zaheeruddin Mohammed, Shaik Jeelani, and Vijaya Rangari

Effect of Graphene on the Flammability Behavior of Polyimide-graphene Composites

Caroline J. Akinyi, and Jude O. Iroh

Effect of Post-processing Annealing on Crystallinity Development and Mechanical Properties of Polyphenylene Sulfide Composites Printed on Large-format Extrusion Deposition System

Vidya Kishore, Xun Chen, Ahmed A. Hassen, John Lindahl, Vlastimil Kunc, and Chad Duty

Effect of Resin Viscoelastic Behavior on High Strain Rate Impact Performance of Fiber Reinforced Composites

Brendan A. Patterson, Casey Busch, Kevin A. Masser, Matthew Bratcher, and Daniel B. Knorr, Jr.

Effect of Strain Rate on Adhesively Bonded Single Lap Joints

Sree Sruthi Modala, and German Reyes Villanueva

Effect of Surface Contamination with Mitigation Methods on Adhesive Composite Bond Integrity and Durability

Brian Hernandez, Gabriela Gutierrez-Duran, Juliette Dubon, Mauricio Pajon, Jose F. Rojas-Sanchez, Benjamin Boesl, and Dwayne McDaniel

Effects of Carbon Nanofiber Z-Threads on the Longitudinal Compressive Strength of Unidirectional CFRP Laminates

Sebastian Kirmse, Keonhyeong Kim, Bikash Ranabhat, and Kuang-Ting Hsiao

Elements and Mechanisms for Applying Artificial Intelligence to Composites Fabrication

Scott Blake

Establishment of an Inline Quality Assurance Method for Fiber Sprayed Preforms

Christian Hopmann, Nadine Magura, Sebastian Stender, Daniel Schneider, and Kai Fischer

Evaluation of a Modified Fused Filament Fabrication Material for Use As Thermal Protection

Steven Kim, Alexa Devega, Mallory Sico, Hao Wu, William Fahy, Kevin Holder, and Joseph H. Koo

Evaluation of an Alternate Method for Determining Yield Strength Offset Values for Selective Laser Sintered Polymeric Materials

Chelsey Henry, Keith Rupel, Charles Park, Joseph Costanzo, Cary Kaczowka, Kevin Malik, and Sayata Ghose

Evaluation of Silicon-containing Phthalonitrile Polymers- Properties, and Degradations

William J. Monzel, Guo-Quan Lu, Timothy L. Pruyn, Christopher L. Houser, and Gordon T. Yee

Experimental and Numerical Investigation of Effects of Cure Cycle on Process-induced-distortions of Carbon Fibre Reinforced Composites

Kamyar Gordnian, Alireza Forghani, Robert Brockman, and Anoush Poursartip

Experimental Investigation of Spring-back Behavior of Composite Sandwich Structures: Part One

Tien M. Vo, Jessica G. Poulsen, Aaron R. Palmer, and Lucas D. Stallbaumer

Experimental Validation of an Ultraviolet Imaging Cube Satellite

Jason L. Grillo, Troy F. Hajjar, Brady E. Hill, Kodi A. Rider, Thomas J. Immel, and Eltahry Elghandour

Extrusion Deposition Additive Manufacturing Utilizing High Glass Transition Temperature Latent Cured Epoxy Systems

John Lindahl, Christopher Hershey, Gary Gladysz, Vinay Mishra, Karana Shah, and Vlastimil Kunc

Fabrication and Characterization of Q-Carbon Field Emission Device

Ariful Haque, and Jagdish Narayan

Fabrication of a Complex Part with Deep-Draw Sections By Resin Transfer Molding

Thomas K. Tsotsis, Gilbert Cespedes-Gonzalez, Mario Wiener, Leslie Cohen, Dominic Calamito, Stephan Costantino, and Florian Klunker

Fast Vs Tough; the Effect of Faster Cure Cycles on the Fracture Properties of Toughened Epoxies

Daniele Incerti, Declan Carolan, and Alexander Fergusson

Feasibility Study of Novel Magnetic Compaction Force Assisted Additive Manufacturing (MCFA-AM) Methodology for Continuous Carbon Fiber Reinforced Polymer (C-CFRP) Composites

Bikash Ranabhat, Sebastian Kirmse, and Kaung-Ting Hsiao

Fiber Alignment Evaluation Through X-Ray Computed Tomography

Jennifer M. Sietins, Daniel B. Knorr Jr., and Jessica C. Sun

Fiber Tow Deformations During Layup of Steered Paths Using Automated Fiber Placement Process

Roudy Wehbe, Brian Tatting, Zafer Gürdal, and Ramy Harik

Fiberglass Composite Reinforcement with Nanocellulose Fiber Sizing

Ejaz Haque, Joyanta Goswami, Robert J. Moon, Douglas M. Fox, and Kyriaki Kalaitzidou

Formability of TUFF Composite Blanks

Shridhar Yarlagadda, Suresh Advani, Joseph Deitzel, Dirk Heider, Dan Molligan, David Roseman, Pavel Simacek, John Tierney,and John W. Gillespie, Jr.

Geometric Constraints for the Topology Optimization of Structures Made of Primitives

Hollis A. Smith, and Julián A. Norato

Heat Treatment of AA2024 Powders for Enhanced Solid State Structural Repairs Via Cold Spray Deposition

William A. Story, Tian Liu, and Luke N. Brewer

High Throughput Carbon Fiber Surface Modification

Zachary R. Hinton, Munetaka Kubota, Lavénia Thursch, Joseph Deitzel, Giuseppe R. Palmese, and Nicolas J. Alvarez

Highly-Sensitive Carbon Nanotube Based Sensors Using Everyday Fabrics for Human Motion Analysis

Amit Chaudhari, Sagar M. Doshi, Colleen Murray, and Erik T. Thostenson

Hybridization of Carbon Nanotube-Glass Fiber Based Hierarchical Composites Using Electrophoretic Deposition

Dae Han Sung, Sagar M. Doshi, Andrew N. Rider, and Erik T. Thostenson

Improved Interyarn Friction and Impact Response of Surface Fibrilized Aramid Fabric

Jalal Nasser, Kelsey Steinke, and Henry A. Sodano

Innovations in Washout Tooling to Lower Cost, Shorten Lead Times, and Improve Properties

Linda L. Clements and John L. Crowley

In-situ Characterization of Composite Ply-Movement and Manufacturing Defects

Sandeep Chava, and Sirish Namilae

In-situ Measurement of Resin Shrinkage in Epoxy Composite

Samarth Motagi, Sandeep Chava, and Sirish Namilae

Integrated Design and Manufacturing Analysis for Automated Fiber Placement Structures

August Noevere, Craig Collier, and Ramy Harik

Investigating the Machinability of 3D Printed Recycled Carbon Fiber

Peng Hao Wang, Sadat Ahsan, and Ronald Sterkenburg

Investigation of Influence of Different Piercing Methods of Abrasive Waterjet on Delamination of Fiber Reinforced Composite Laminate

Garam Kim, Benjamin R. Denos, Ronald Sterkenburg, PengHao Wang, and Sadat Ahsan

Investigation of Process Variation Effects Via a Homogeneous 3-Dimensional Tensile Test Coupon in Polyjet 3D Additive Printing

Ravi Pratap Singh. Tomar, Furkan I. Ulu, Dr. Ram V. Mohan, and Dr. Ajit kelkar

Large-scale Additive Manufacturing of Highly Exothermic Reactive Polymer Systems

Stian K. Romberg, Christopher J. Hershey, John M. Lindahl, William Carter, Brett G. Compton, and Vlastimil Kunc

Low Melt Paek (LM PAEK) Prepreg for Improved Processing of Thermoplastic Composites

Hans Luinge, D. DeWayne Howell, and Jerik Straetker

Low Velocity Impact Response of Hybrid Pseudo-Woven Fiber-Reinforced Composite Laminates

Cyrus Vakili Rad, Frank Thomas, Subramani Sockalingam, and Zafer Gurdal

Machine Learning Based AFP Inspection: A Tool for Characterization and Integration

Christopher Sacco, Anis Baz Radwan, Tyler Beatty, and Ramy Harik

Manufacture and Compression Testing of a Machined Composite Mechanical System

Thomas J. Rohrbach and Eltahry Elghandour

Mechanical and Electrical Characteristics of 3D Printed Multi-Material Polymer Composites

Sylvestis Oberoi, Velram Balaji Mohan, and Debes Bhattacharyya

Mechanical and Electrical Properties of Carbon Nanotubes Based Acrylonitrile Butadiene Styrene Nanocomposite Fabricated Using Fused Deposition Method

Sachin C. Kulkarni, Jitendra Singh, and Dattaji. K. Shinde

Mechanical Characterization of Core Shell Rubber Particles Modified Vinyl Ester and Glass Fiber Reinforced Composites

Swayam Shree and Jitendra S. Tate

Microstructural Evaluation of Aligned, Short Fiber TUFF Material

Dirk Heider, John Tierney, Mohamed A. Henchir, Verena Gargitter, Shridhar Yarlagadda, John W. Gillespie Jr., Jessica Sun, Jennifer M. Sietins, and Dan Knorr

Microstructure-Sensitive ICME Workflows for Fatigue Critical Applications

Krzysztof S. Stopka, Gary Whelan, and David L. McDowell

Micro-Waxs Study of Structural Heterogeneity in Single Pan-Precursor and Subsequent Carbon Fiber

C. Creighton, P. Lynch, S. Nunna, B. Fox, M. de Jong, and S. Mudie

Molecular Weight Effects on the Processing, Thermal, and Mechanical Properties of Oligomeric Bisphenol a Phthalonitrile Resins

Tristan Butler, Stephen Deese, Madeleine Taylor, and Matt Laskoski

Multifunctional Hybrid Composite for Thermal Protection of Carbon Fiber Reinforced Polymers (CFRPS) in Aerospace Applications

Tosin D. Ajayi, Kyunghoon Kim, Jun Liu, Bill C. Nickerson, and Cheryl Xu

Multi-Functional Nano-Porous Ceramics

Namiko Yamamoto, Jogender Singh, and Jingyao Dai

Multiscale Approaches to Formation of Thermoplastic Prepreg Short Carbon Fiber

Zachary R. Hinton, Joy Baxter, Charleine Ngantsan, Maria M. Diaz-Acevedo, Simge Uzun, Prem D. Patel, Lavénia Thursch, Giuseppe R. Palmese, and Nicolas J. Alvarez

Multi-scale Material Modeling and Print Simulation for “First Time Right” Additive Manufacturing

Olivier Lietaer, Sylvain Bouillon, Elodie Seignobos, and Lucie Berger

Multiscale Simulation of Unidirectional Carbon Fiber Reinformced Polymer Strength

Hayden Cornwell, Luiz Lima, and Flavio Souza

Nano-Ceramic Modified Polymer Matrix Glass Composites for Impact Applications

Harish Kallagunta, and Jitendra S. Tate

New Method of Interfacial and Micro-damage Sensing of Composites Via Pencil Lead Drawing Paper Sensor (PLDPS) and Electrical Resistance (ER) Mapping

Joung-Man Park, Ha-Seung Park, Pyeong-Su Shin, Jong-Hyun Kim, Yeong-Min Baek, and Lawrence K. DeVries

Nondestructive, Noncontact Quantification of Carbon Fiber Alignment and Orientation By High-speed Microwave Ellipsometry

Nina P. Basta, Shridhar Yarlagadda, Dirk Heider, Edward J. Garboczi, Christian J. Long, and Nathan D. Orloff

Novel Fst Thermoset Solution for Lightweight Composite Aerospace Interior Applications

George Guo, Yen-Loan Nguyen, and Carl Holt

Novel Ultra Low Viscosity Epoxy for Enhancing the Tg and Processability of Multifunctional Thermosets

Huifeng Qian and Prashanth Badrinarayanan

Optically Enhanced Bonding Workstation for Robust Bonding

Eileen O. Kutscha, Kay Y. Blohowiak, Vicki Wu, and Marc J. Piehl

Out-of-autoclave Process and Automation: A Successful Path to Highly Integrated and Cost Efficient Composite Wing Moveables

Thibault de Lumley, François Mathieu, Didier Cornet, Dimitri Gueuning, and Nicolas Van Hille

Overview and Status of “Composite Joints with Inherent Disbond Arrest Capability (COJAC)” Program

Jonathan Bartley-Cho, and William C. Nickerson

Plasma Surface Functionalization of AFP Manufactured Composites for Improved Adhesive Bond Performance

Ibrahim Sarikaya, Malik Tahiyat, Ramy Harik, Tanvir Farouk, John Connell, and Peter Gilday

Polyetherketoneketone (PEKK), a Versatile Ultra-polymer for Additive Manufacturing

Roderick Reber III, Brian Koo, and David Liu

Prediction of Fatigue Failure in Fibrous Composites Using the Reduced-Order Multiscale Discrete Damage Theory

Zimu Su and Caglar Oskay

Printable Epoxy Carbon Fiber Composites and Their Mechanical Properties

Andrew Abbott, Emrah Celik, Harry A. Pierson, Hilmar Koerner, and Jeffery W. Baur

Process Modeling and Manufacturing of Thermoplastic Prepreg Tape

Alex M. Reichanadter, Joshua S. Dustin, and Jan-Anders E. Mansson

Process Modelling of Induction Welding for Thermoplastic Composite Materials By Neural Networks

Hao Guo, Jaspreet Pandher, Michael van Tooren, and Song Wang

Processing of Hollow Glass Sphere/Polyester/Glass Fiber Sheet Molding Composites

Arielle Berman, Edward DiLoreto, Yong Wu, Troy Ista, Andrew D’Souza, Robert Moon, and Kyriaki Kalaitzidou

Production of Low Coefficient of Thermal Expansion Composite Tooling Manufactured Via 3D Printing

Pedro Cortes, Michael Maravola, Brett Conner, Stephen Szaruga, Brian Hetzel, and Eric MacDonald

Properties for AA7050 Deposits Produced By the Cold Spray Process

Timothy J. Eden, Kiran G. Judd, and Raymond M. Girrior

Pyrolyzed Polydopamine (py-pda) Functionalized Carbon Nanotubes and their Carbon/Carbon Composite with Improved Mechanical and Electrical Properties

Songlin Zhang, Ayou Hao, Nam Nguyen, Abiodun Oluwalowo, Juhil Mahendra Ahir Ahir, Zhe Liu, Yourri Dessureault, Jin Gyu Park, and Richard Liang

Rapid High Performance Molding of Structural Thermoplastic Composite Parts

Justin J. Schell, Steven M. Shewchuk, David Leach, Trevor McCrea, Ned Abrams, Richard Postera, and Gail L. Hahn

Rapid High-Performance Molding (RAPM) for Small Parts

Gail L. Hahn and Thomas K. Tsotsis

Recent Developments in Boron Fiber-Reinforced Composite Materials

James V. Marzik, Thomas Foltz, and Chantel N. Camardese

Reliable Bonding of Composite Laminates Using Reflowable Epoxy Resins

Frank L. Palmieri, Tyler B. Hudson, Roberto J. Cano, Erik R. Tastepe, Dean S. Rufeisen, Luay U. Ahmed, Yi Lin, Christopher J. Wohl, and John W. Connell

Reliable Optimized Structures with High Performance Continuous Fiber Thermoplastic Composites From Additive Manufacturing (AM)

Danning Zhang, Natalie Rudolph, Peter Woytowitz

Self-regulated Production of an Automotive Composite Floor Pan

Michael Emonts, Kai Fischer, Sebastian Stender, and Nadine Magura

Smart Composite Using Optic Fiber Sensor Embedded in Three Dimensional Woven Preform

Elizabeth C. Claunch, Abdel-Fattah M. Seyam, and Kara J. Peters

Spring Frame Press Fabrication of Aerospace Production Components

Timothy J. Luchini, Alejandro J. Rodriguez, Scott A. Rogers, Aurele Bras, Adam Whysall, Richard Russell, Scott Lucas, and Gail L. Hahn

Stiffness Prediction and Validation of Large Volume 3D Printed, Short-Fiber-Filled Polymer Composites

Timothy Russell and David A. Jack

Structural Health Monitoring of Fiber-Reinforced Composite Using Wireless Magnetostrictive Sensors

Sujjatul Islam, Relebohile G. Qhobosheane, Muthu R.P. Elenchenzhian, Vamsee Vadlamudi, Rassel Raihan, Kenneth Reifsnider, and Wen Shen

Supported Punch Shear Behaviour of Polycarbonate: Test, Analysis and Numerical Simulation

Yunfa Zhang, Qi Yang, Richard Desnoyers, and Andrew Johnston

Surface Treatment of Pitch-Based Discontinuous Carbon Fibers

Ngon T. Tran, Brendan A. Patterson, Vincent M. Wu, and Daniel B. Knorr, Jr.

Surface Treatment of TUFF Pitch-Based Carbon Fiber for Adhesion Promotion in High TG Thermoplastic Composites

J.M. Deitzel, M. Kubota, J.W. Gillespie Jr., Z.R. Hinton, L. Thursch, N. Alvarez, G. Palmese, J.J. Fallon, M. Bortner, R. Zhang, R.M. Joseph, T. Schumaker, J. Riffle, S. Lukubira, S Kanhere, M.C. Tang, and A. Ogale

Tailorable Universal Feedstock for Forming (TUFF): Overview and Performance

Shridhar Yarlagadda, Joseph Deitzel, Dirk Heider, John Tierney, and John W. Gillespie Jr.

Technical Cost Modeling Methodology for Novel Manufacturing

Robin J. Glebes, Joshua S. Dustin, and Jan-Anders E. Mansson

Temperature-Dependent Mechanical Response of Carbon Nanotube Reinforced Epoxy Nanocomposites: An Atomistic Simulation Study

Jacob Schichtel, Bonsung Koo, and Aditi Chattopadhyay

The Effect of Fabric Architecture on the Processing and Properties of Composites Made By Vacuum Assisted Resin Transfer Molding (VARTM)

Francois Ntakobatagize, Oscar Ntakontagize, and Donald Klosterman

The Effect of Shape and Orientation on the Barrier Properties of Flake-filled Composites: A 3D Approach

Andreas Tsiantis, and T.D. Papathanasiou

The Mechanical Performance of Carbon Fibres- Addressing the Role of Microstructure

Peter Lynch, Claudia Creighton, David Fox, Pablo Mota Santiago, Adrian Hawley, and Stephen Mudie

Three-Dimensional Modeling of Ablative Materials Exposed to Oxy-Acetylene Test Bed

Ozen Atak, Ryan McDermott, Jon Langston, and Joseph H. Koo

Topology Optimization of Coupled Thermomechanical Analysis for Additive Manufacturing

Jack S. Ramsey and Dr. Douglas E. Smith

Ultra-Hard Diamene Films on Silicon Carbide for Mechanical Applications

Filippo Cellini, Francesco Lavini, and Elisa Riedo

Uncovering Non-Obvious Variables in Surface Preparation Processes for Bonding and Coating

R. Giles Dillingham

Understanding and Modeling the Co-cure of Honeycomb Core Sandwich Structures

Timotei Centea, Pavel Simacek, Mark Anders, Navid Niknafs Kermani, Daniel Zebrine, Suresh Advani, and Steven Nutt

Using Molecular Simulation with High-temperature Composites Resins

Mohammad Atif Faiz Afzal, Jeffrey Sanders, Alexander Goldberg, Andrea R. Browning, and Mathew D. Halls

Using Z-Axis Milled Fibers to Toughen Carbon Fiber Composites

Anvesh Gurijala, Robert D. Mone, Chunzhou Pan, and Dr. Randall M. Erb

Virtual Comissioning of Manufacturing System Intelligent Control

Kaishu Xia, Christopher Sacco, Max Kirkpatrick, Ramy Harik, and Abdel-Moez Bayoumi

Wafer Scale-Up and Emergence of Ferromagnetism in Superhard Q-Carbon Coatings By Nanosecond Pulsed Laser Irradiation

Siddharth Gupta, Ritesh Sachan, and Jagdish Narayan

Z-pinning Approach for Improving Interlayer Strength of 3D Printed Parts

Chad Duty, Jordan Failla, Seokpum Kim, Tyler Smith, John Lindahl, and Vlastimil Kunc